Description

Description

Testo 330i Basic Kit 1 Flue Gas Analyzer w/O2, CO, Dilution and Bluetooth

Reqires the free testo 330i combistion app

The Testo 330i flue gas analyzer combines the proven measuring technology of the preceding model Testo 330 LL with a revolutionary new method of operation: operation independent of measuring location via smartphone, a sturdy testoFix probe holder and paperless documentation. This instrument embodies the current trends in flue gas measurement. The centerpiece of the set is the Testo 330i flue gas analyzer with H2-compensated CO sensor. The flue gas analyzer is therefore also approved for the official acceptance testing of heating systems. Operation of the flue gas analyzer and the display of readings are implemented independently of the measuring location via the Testo 330i App on your smartphone or tablet. Here, you can make adjustments to the measuring instrument, analyze the flue gas values, enter customer data and create measurement protocols. You can then add comments or photos of the system to the protocols, and send them to the customer or your office via e-mail.

Testo 330i-Kit1 includes the testo 330i Flue Gas Analyzer with long life gas sensors that last up to 6 years and up to 30,000 ppm CO measurements via automatic fresh air dilution. Rechargeable battery and calibration. The 330i Flue Gas Analyzer kit does not have a display but is designed to connect to your SmartPhone or tablet using the Testo 330i App via Bluetooth function, giving the user ability to create and compare measurement reports while on site.

Requirement: iOS 7.1 / Android 4.3 or newer, device with Bluetooth 4.0.

Features:

User-replaceable long-life sensors with a service life of up to 6 years. This saves at least one sensor replacement over the flue gas analyzer's typical useful life
Integrated draft and gas zeroing without removing the probe. The probe can remain in the flue during zeroing
Fresh air dilution upon exceeding a CO threshold value up to 30,000 ppm
Fully enclosed, tough housing

Specs

Differential Pressure
Measuring range	0 to 120 InH2O / 0 to 300 hPa
Accuracy	±0.2 InH2O (0.0 to +20.0 InH2O) / ±0.5 hPa (0.0 to +50.0 hPa) ±1 % of remaining measurement value (+20.0 to +40.0 InH2O) / ±1 % of mv (+50.1 to +100.0 hPa) ±1.5 % of remaining measurement value (Remaining Range)
Resolution	0.0 InH2O / 0.1 hPa

Flue gas O2
Measuring range	0 to 21 Vol.%
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

Flue gas CO
Measuring range	0 to 8,000 ppm
Accuracy	±10 ppm or ±10 % of mv (0 to 200 ppm) ±20 ppm or ±5 % of mv (201 to 2,000 ppm) ±10 % of mv (2,001 to 8,000 ppm)
Resolution	1 ppm

CO determination (with H2-compensation), automatic dilution
Measuring range	0 to 30,000 ppm
Accuracy	±200 ppm or ±20 % of mv (0 to 30,000 ppm)
Resolution	1 ppm

Flue Gas NO
Measuring range	0 to 3,000 ppm
Accuracy	±5 ppm (0 to 100 ppm) ±5 % of mv (101 to 2,000 ppm) ±10 % of mv (2,001 to 3,000 ppm)
Resolution	1 ppm

Flue Gas Draft
Measuring range	-4.00 to +16 InH2O / -9.99 to +40 hPa
Accuracy	±0.01 InH2O or ±5 % of mv (-0.20 to +0.24 InH2O) / ±0.02 hPa or ±5 % of mv (-0.50 to +0.60 hPa) ±0.01 InH2O (+0.24 to +1.20 InH2O) / ±0.03 hPa (+0.61 to +3.00 hPa) ±1.5 % of mv (1.20 to +16.00 InH2O) / ±1.5 % of mv (3.01 to +40.00 hPa)
Resolution	0.00 InH2O / 0.01 hPa

Temperature
Measuring range	-40° to 2,192 °F / -40 to +1,200 °C
Accuracy	±0.9 °F (32.0° to 212.0 °F) / ±0.5 °C (0.0 to +100.0 °C) ±0.5 % of mv (Remaining Range)
Resolution	0.1 °F (-40° to 1,831.8 °F) / 0.1 °C (-40 to +999.9 °C) ±1 °F (Remaining Range) / 1 °C (Remaining Range)

Efficiency (calculated)
Measuring range	0 to 120 %
Resolution	0.1 %

Flue Gas loss (calculated)
Measuring range	0 to 99.9 %
Resolution	0.1 %

Flue Gas CO2 calculation (calculated from O2)
Measuring range	Display range 0 to CO2 max
Accuracy	±0.2 Vol.%
Resolution	0.1 Vol.%

General technical data
Storage temperature	-4° to 122 °F / -20 to +50 °C
Weight	25 oz. (excluding battery) / 720 g (excluding battery)
Dimensions	11 x 6 x 2 in. / 270 x 160 x 57 mm
Operating temperature	23° to 113 °F / -5 to +45 °C
Warranty	Instrument, Probe, Gas sensors (O2, CO) 4 years NO sensor 2 years Thermocouple, rechargeable battery: 1 year
Power supply	Rech. batt. block 3.7 V / 2.6 Ah; Power supply unit 6 V / 1.2 A (optional)
System requirements	requires iOS 7.1 or newer; requires Android 4.3 or newer; requires mobile end device with Bluetooth 4.0
Maximum	500,000 readings