Testo 160 External Temperature and Humidity Probe
Measure temperature and relative humidity with an accurate and unobtrusive plug-in digital probe.
- Tiny temperature and humidity probe for use in enclosed spaces
- Doesn’t effect the air exchange rate thanks to the wall bushing with an O-ring seal
- "Smart probe" holds internal calibration points
- Measurement range: 0 to 100% relative humidity; temperature 14 to 122 °F (-10 to +50 °C)
Normally, it is difficult to hide the data logger. The testo digital temperature / humidity probe (1.5" x 0.63" / 36 x 16 mm) can be hidden showing only a small paintable vent cap and the bushing’s collar. The data from the probe transfer to the Wi-Fi logger over a thin 1.7 ft. / 0.6 m or an 8.2 ft. / 2.5 m extension cable. The maximum length of combined extension cables is 32.8 ft. / 10 meters.
Applications for the temperature and humidity probe The temperature and humidity probe is ideal for use in enclsoed spaces such as schools and offices, museums or art exibits. Use the high-precision temperature and humidity probe (with external data logger) to measure the temperature and relative humidity in enclosed spaces. The supplied base plate bushing with an O-ring prevents leakage of external air.
Smart probe calibration The temperature and humidity probe offers maximum digital measurement reliability. As the processing of measuring values is done within the probe, the quality of the measurement is not affected by the length of the cable between the Wi-Fi data logger and the probe. The probe can be sent in for calibration on its own (without the data logger) because the calibration points are stored internally.
|Measuring Range||14°F to 122°F|
|Accuracy||± 0.9 °F|
|Resolution||0.1 °F||Humidity Capacitive|
|Measuring Range||0 to 100%RH (non-condensing)|
|Accuracy||±2.0 %rH at +77.0 °F and 20 to 80 %rH / ±2.0 %RH at +25.0 °C and 20 to 80 %RH |
±3.0 %rH at +77.0 °F and < 20%rH and > 80 %rH / ±3.0 %RH at +25.0 °C and < 20%RH and > 80 %RH
±1.0 %rH hysteresis
±1.0 %rH / year drift
- (1) Testo 160 External Temperature and Humidity Probe
Watch a webinar series hosted by TruTech Tools' Bill Spohn and Testo's Steve Pascuzzo focused on
indoor air quality and ASHRAE Guidlines for validating and controlling IAQ in educational facilities
Software / App