Veto Pro Pac TECH MCT HI-VIZ Yellow Compact Tool Bag
The fan favorite Veto TECH MCT now in Yellow HI-VIZ
The TECH-MCT HI-VIZ YELLOW is a compact full featured Service Tech tool bag with 12" of vertical storage space offering maximum storage capacity in the MC platform. This bag contains bright yellow Hi-Viz construction and reflective accents.
- 44 Interior & exterior pockets of varying sizes
- Hi-Viz Construction and Reflective Accents
- Outside mounted stainless tape clip
- Electrical tape strap
- YKK Locking Zippers
- Holds over 50 hand tools
- Waterproof polypropylene base for moisture and abrasion protection
- Extra wide padded shoulder strap
- Over-molded ergonomic grip
- Light gray interior for improved visibility
- 5 year limited warranty
|Max Payload||30lbs / 14kg|
|Weight (empty)||7.3 lbs|
|Height (with handle)||17 in|
|Warranty||5 year limited|
- (1) Veto Pro Pac TECH MCT HI-VIZ Yellow Compact Tool Bag
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
Software / App