Appion Core & Tee Master Pack - Core Removal Tools, Core Control Tools, and Charging Tees

Appion Core & Tee Master Pack - Core Removal Tools, Core Control Tools, and Charging Tees

A Bundle of Vacuum-Rated Appion Refrigerant Service Tools

El kit incluye:

• (2) Appion MGAVCT 1/4" Standard Vacuum-Rated Valve Core Removal Tool
• (2) Appion MGAVCR 5/16" Valve Core Removal Tool for Mini Splits
• (2) Appion CCT14 Core Control Tool 1/4 in
• (2) Appion CCT516 Core Control Tool 5/16 in
• (2) Appion CTEE14 MegaSeal Low-Loss Charging T-Fitting - 1/4" FL
• (2) Appion CTEE516 MegaSeal Low-Loss Charging T-Fitting - 5/16" FL

---

Appion MGAVCT & MGAVCR Vacuum-Rated Valve Core Removal Tools

Vacuum-Rated Valve Core Removal Tools for 1/4in Standard Fittings or 5/16in for Ductless Systems

Core tools are one of the most important components of a proper evacuation rig. Removing the cores allows for a full unrestricted flow through the service port significantly decreasing both evacuation and or recovery times. Standard core tools are only designed to operate under pressure to allow for the replacement of leaking valve cores without the removal of the refrigerant. Appion core tools are rated for both vacuum and pressure allowing for typical service as well as faster evacuations and recovery. A side port allows for isolation of the hoses for determining the level of vacuum during the evacuation process. Engineered for vacuum, Appion core tools are the best money can buy.

Características y ventajas principales

• Vacío nominal de 20 micras
• Easily remove access valve cores for full, unrestricted flow
• Double O-Ring ball valve seal for accurate "blank off" vacuum testing
• 1/4" side port for vacuum gauges
• Diseñado para refrigerantes de alta presión, incluido el R410a
• New knurled silver base with built‑in magnets helps keep valve cores secure during service
• Adjustable Tip - Grab all cores with confidence

Why Remove Valve Cores?
Valve cores are designed to restrict flow and minimize refrigerant loss. Up to 90% of the access port can be restricted by a valve core. Removing them maximizes flow and can save hours on any job.

Hot Tanks and Slow Recovery?
A valve core acts like an expansion valve, turning liquid refrigerant into vapor and superheating the refrigerant. This causes the tank to heat up and leads to painfully slow recovery times.

Tired of Slow Evacuations?
Evacuating through a valve core and core depressor can reduce the potential flow of any vacuum pump to as little as 0.2CFM.

Are your Tools Rated for Vacuum and Pressure?
All Appion Valve Core Removal Tools are Vacuum-Rated to 20 microns and designed for high pressure refrigerants, such as R410A. This will give you the peace of mind that your tools aren't going to leak in a deep vacuum or during critical parts of the recovery process.

---

Appion CCT14 & CCT516 Core Control Tools

Vacuum-Rated Core Depressor Tools for 1/4in or 5/16in Schrader Valve Fittings

¡Consigue el máximo control al presionar el núcleo de una válvula! Este racor de baja pérdida presiona los núcleos de las válvulas con la máxima precisión, lo que lo hace perfecto para cargar con precisión sistemas de aire acondicionado o realizar el mantenimiento de válvulas Schrader de alto caudal. Conecta rápidamente un manómetro digital de conexión rápida para facilitar el diagnóstico del sistema. El avanzado sellado trasero hace que esta herramienta de control del núcleo sea perfecta para aislar el manómetro, lo que añade otra capa de protección para tu vacuómetro.

Características y ventajas principales

• Capacidad de vacío de hasta 20 micras
• Fabricado en aluminio de calidad aeronáutica para garantizar la máxima durabilidad
• El diseño con doble junta tórica garantiza una fiabilidad inigualable en condiciones de alta presión y vacío profundo.
• Salida lateral de 1/4 pulgadas para conectar un manómetro o una manguera
• Diseñado para refrigerantes de alta presión, incluido el R410a
• El extremo plateado estriado, de diseño mejorado, ofrece un mayor control y facilidad de uso

¿Por qué utilizar una herramienta de depresión de núcleo?
Las herramientas de depresión de núcleo resultan extremadamente útiles a la hora de recargar un sistema de aire acondicionado, realizar el mantenimiento de sistemas con válvulas Schrader de alto caudal, aislar un vacuómetro y diagnosticar rápidamente las presiones del sistema.

¿Tus herramientas están homologadas para el vacío y la presión?
Todas las herramientas Appion Core Control están homologadas para un vacío de hasta 20 micras y diseñadas para refrigerantes de alta presión, como el R410A. Esto te dará la tranquilidad de saber que tus herramientas no presentarán fugas ni en vacío profundo ni bajo presión.

---

Appion CTEE14 & CTEE516 MegaSeal Low-Loss Charging Tee Fittings

Take Control of Charging a System with 1/4 in or 5/16in Service Fittings

Use the MegaSeal Low-Loss Charging-T to help meter refrigerant during the charging process. The side port allows for easy connection of a Digital Pressure/Temperature Gauge to monitor system pressures during the whole process.

Características y ventajas principales

• Drastically Minimize Charge Loss - Accurately charge AC/R systems without a manifold or unnecessary hoses
• Multifaceted Adapter for Easy System Diagnostics - Quickly check system pressure during or after the charging process