Descripción
Fieldpiece SC660 Wireless Clamp Meter
The Most Advanced Meter on the Market
Good luck finding something the SC660 doesn’t do. See the dial in the dark, use the AC/DC swivel clamp, measure dual temp, or find phase rotation.
Job Link System Capability via JL2 Transmitter
Send and save electrical measurements to Job Link System mobile app via the JL2 long range transmitter for professional reporting. Plus, calculate power (kW) and system efficiency (EER and SEER) for in depth understanding of system performance in real world conditions. (SDP2 needed for system efficiency calculations.)
Swivel Head with LED Flashlight
Open the clamp to illuminate the wire bundle you’re hunting. Rotate the clamp 180° to see the display easier. The clamp’s claw grabs the wire you want to measure.
Electrical Testing for HVACR
True RMS readings through the clamp or leads. Capture starting amps with Inrush.
Test 3-Phase Power Test
Conveniently test phase rotation without carrying around an extra meter or extra lead. With the included alligator test lead connected to L1, you can determine phase rotation with one hand.
Trusted Dual-Temp
Reliable temperature in fast changing environments. View two thermocouple inputs at the same time, or check delta T across the evaporator. Select T1 & T2, T1 & T1-T2, or T2 & T1-T2.
Huge Backlit Display
View two measurements so large you can read them at a distance and in the dark.
Rugged Dual Display
Broad temperature range tolerance allows for testing in freezers and on rooftops.
Capacitancia
Test motor start and run caps. Determine when a capacitor needs to be replaced.
Wireless Testing
Send measurements to the Job Link mobile system app via JL2 transmitter. Or view measurements from other compatible tools (ET2W, EH4W, SC57, LT17AW, SC460, SC660) across the jobsite LIVE.
Magnetic Hanger
Hanging strap flips out to keep the meter locked in place.
Probe Storage
Snap the leads into the back of the meter. No more tangles or probe tip pricks.
Dial Backlight
View the dial in low light.
Safety + Convenience
Use non-contact voltage to check if the wire is hot or not. Use the probe holder on the clamp to test voltage more safely with one hand. Test voltage hands-free using the magnetic hanger
Características técnicas
| Display: | 10000 count dual display |
| Backlight: | 5 minute duration with auto-off. Blue color |
| Overrange: | (OL) or (-OL) is displayed |
| Measurement rate: | 3.3 times per second, nominal |
| Zero: | Automatic |
| Operating environment: | 32°F to 122°F (0°C to 50°C) at <70% relative humidity |
| Storage temperature: | -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed) |
| Precisión: | Stated accuracy @ 73°F ±9°F (23°C ±5°C), <75%RH |
| Temperature coefficient: | 0.1 x (specified accuracy) per °C [0°C to 19°C (32°F to 66°F), 28°C to 50° C(82°F to 122°F)] |
| APO (Auto Power Off): | Approx. 30 minutes |
| Potencia: | Single standard 9-volt battery, NEDA 1604, JIS 006P, IEC 6F22 |
| Battery life: | 100 hours typical alkaline |
| Low battery indication: | Battery icon blinks and "LO.bt" is displayed when the battery voltage drops below the operating level |
| Dimensiones: | 287.5mm(H) x 79.5mm(W) x 50.0mm(D) |
| Peso: | Approx. 450g including battery |
| Altitude: | Up to 6562 ft (2000m) |
| Overload protection: | 600 VDC or 600VAC rms unless otherwise stated |
| Test leads: | Use UL listed test leads that comply to UL61010-031 rated CATIII 600V or above. Included test leads are gold-plated and have removeable safety caps. |
Incluye
- (1) SC660 Wireless Clamp Meter
- (1) ADLS2 Deluxe Silicone Lead Set with Gold Plated Tips and Removable Sheath
- (2) ATB1 Wrap Tab Type K Thermocouple
- (1) ASA2 Short Alligator Lead Extensions
- (2) Velcro Strap
- (1) Pila de 9 V
- (1) ANC7 Padded Case
- (1) Operator's Manual
Vídeos
Software / Aplicación