Descripción
TEC Build Your Own BPI Weatherization Kit by TruTech Tools
Choose options and build your own BPI kit with TEC Blower Door
The TEC Build Your Own BPI Kit from TruTech Tools is designed specifically for professionals in the BPI Weatherization community who need flexibility, reliability, and precision on the job. This customizable kit lets you hand-pick the tools you trust — including the Minneapolis Blower Door, Duct Blaster®, and important accessories such as a combustion analyzer and thermal imager — to match your specific testing and diagnostic needs.
Whether you're conducting blower door tests, duct leakage testing, or whole-house energy assessments, this kit gives you control to configure the right equipment while ensuring full BPI compliance and field-ready performance.
Perfect for:
- BPI Building Analysts
- Energy Auditors
- Weatherization professionals
- Contractors working on energy efficiency programs
Why choose this kit?
- Built around TEC's proven and trusted equipment
- Easily configure for your specific certification or project requirements
- Backed by TruTech Tools' industry-leading support and expertise
Streamline your field setup with a kit built your way — without paying for gear you don't need. Create a BPI kit that works as hard as you do.
Características técnicas
| DG-1000 Specs | |
|---|---|
| No. of Independent Pressure Channels | Dos |
| Rango de presión | -2.500 a +2.500 pascales (-10 a +10 pulgadas de agua) |
| Resolución de pantalla | 0,1 Pa para lecturas de 0 a 999,9 Pa 1 Pa para lecturas de 1000 Pa o más |
| Accuracy at Typical Use Conditions*/** | El 0,9 % de la lectura de presión o 0,12 Pa, el valor que sea mayor |
| Unidades de medida | Channel A - Pascals (Future addition - inches of water) Channel B - Pascals, CFM, CFM@75, CFM@50, CFM@25, ACH50, CFM@25/ft², CFM@25/100ft², CFM@50/ft², CFM@50/100ft², CFM@75/ft², CFM@75/100ft² (Future additions - inches of water and equivalent metric units) |
| Puesta a cero automática | Al arrancar y, a partir de ahí, cada 10 segundos |
| Promedio temporal | 1, 5 y 10 segundos, y a largo plazo (actualización continua) |
| Operating Temperature Range*** | 42 degrees F to 115 degrees F (5.5 degrees C to 46 degrees C) |
| Rango de temperatura de almacenamiento | -4 degrees F to 140 degrees F (-20 degrees C to 60 degrees C) |
| Pantalla | 480 x 272 píxeles, 3,75 x 2,125 pulgadas, pantalla táctil capacitiva |
| Retroiluminación de la pantalla | Ajustable por el usuario (por defecto, 40 %) |
| Potencia | Dos baterías de iones de litio 18650 con cargador de CA/adaptador de corriente incluidos |
| Duración de la batería | Más de 15 horas de uso continuo con la configuración predeterminada 13 horas de uso continuo con la configuración predeterminada y el wifi activado |
| Apagado automático | Ajustable de 10 minutos a 2 horas |
| Dimensiones | 7,0 x 4,2 x 1,4 pulgadas |
| Peso | 15,7 oz |
| 5000 Series Fan Specs | |
| Caudal máximo | 6.300 CFM en aire libre (2.973 l/s, 10.700 m³/h) 5.350 CFM a 50 Pa (2.524 l/s, 9.090 m³/h) 4 900 CFM a 75 Pa (2 360 l/s, 8 495 m³/h) |
| Caudal mínimo | 300 CFM con el anillo B (141 l/s, 510 m³/h) 85 CFM con el anillo C (40 l/s, 144 m³/h) 30 CFM con el anillo D (14 l/s, 51 m³/h) 11 CFM con el anillo E (5 l/s, 18 m³/h) |
| Dimensiones | Diámetro de entrada de 20 pulgadas (50 cm), longitud de 10,25 pulgadas (26 cm) |
| Peso | 33 libras (15 kg) con los anillos de flujo A y B |
| Precisión del caudal | ± 3 % con el DG-700 o el DG-1000; anillos D y E: ± 4 % o 1 CFM |
| Calibración | Meets ASTM Standard E779, E1554, CGSB-149.10-M86, EN 13829, ATTMA Technical Standard 1, NFPA 2001, RESNET and USACE |
| Potencia | Motor de 3/4 hp (110 V) |
| Frame Specs | |
| Material del marco | Aluminio extruido |
| Ancho | De 28 pulgadas a 40 pulgadas (de 71 cm a 101 cm) |
| Altura | De 52 pulgadas a 96 pulgadas (de 132 cm a 244 cm) |
| Sello | Junta flexible de EPDM |
| Material del panel | Nailon con ventana de vinilo integrada |
Incluye
By default this kit includes a TEC Blower Door as shown below. Add more products using the options near the 'Add to Cart' button to create your own custom kit.
- Minneapolis Blower Door™ kit includes:
- Model 3 fan
- Ring A
- Ring B
- No flow plate
- Aluminum frame carrying case contains:
- Two 96" vertical pieces
- Two 45" horizontal pieces
- 45" crossbar with velcro strap
- Gauge hanger bar
- Blower door accessory case contains:
- Single fan nylon panel
- Fan speed controller
- 30' clear tubing
- Gauge board with clamp
- Overview booklet
- Wind Tee
- Pressure and flow gauge case contains:
- DG-1000 pressure and flow gauge
- Two Lithium Ion batteries - installed
- Charger block and cable
- Screen protector
- 15' green hose
- 10' red hose
- Fan control cable
- Digital gauge extension tube
- Plastic hose connectors
- Calibration certificate
TEC Minneapolis Blower
Door™ Overview