Descripción

Descripción

Testo 310 Residential Combustion Analyzer

The testo 310 residential combustion analyzer represents a new class of instruments for Testo and provides exceptional value and expanded capabilities in combustion testing. The 310 sets a new standard in reliable combustion tuning with its rugged housing, simple design and advanced sensor technology. The easy-to-read backlit display shows more measurements which provides a more complete picture of the combustion process. Simple top-of-display icons show you the current measurement functions. After only 30 seconds the 310 is ready to test.

Fully featured - for better testing and tuning

O2, CO (w/ NOx filters standard), CO2
Draft & Pressure
Temperature (flue & ambient)
Combustion efficiency & excess air
Undiluted CO (CO air free)
Ambient CO

Simple to use with reliable results

The testo 310 eliminates the need for look up charts and the purchase and disposal of expensive chemicals. The kink-resistant hose is integrated into the housing to eliminate leaks. The stainless steel probe and cone-stop is perfect for residential furnace, boiler and water heater applications. With six different fuels to select from, it provides the flexibility you need for your tuning opportunities.

Faster, productive - tune ups, maintenance, and more...

Whether you need to perform basic or more complex combustion tuning, perform maintenance or safety checks, or install new combustion units, the fully featured testo 310 delivers more combustion parameters. Use the 310 for accurate heating adjustment so you can get it right the first time - every time.

Características técnicas

Temperatura - Termopar tipo K
Rango de medición	- De4° a 212 °F / De -20 a +100 °C
Precisión	±2 °F / ±1 °C
Resolución	0,1 °F / 0,1 °C
Tiempo de reacción	< 50 sec
Temperature (ambient temperature)

Temperature - Type J TC
Rango de medición	32° to 752 °F / 0 to +400 °C
Precisión	±1,8 °F (de 32 °F a 212 °F) / ±1 °C (de 0 °C a +100 °C) ±1,5 % de mv (> 212 °F) / ±1,5 % de mv (> 100 °C)
Resolución	0,1 °F / 0,1 °C
Tiempo de reacción	< 50 sec
Temperature (flue gas)

Flue gas O2
Rango de medición	0 to 21 Vol.%
Precisión	±0.2 Vol.%
Resolución	0.1 Vol.%
Tiempo de reacción	30 sec

Flue Gas Draft
Rango de medición	-8 to +8 InH2O / -20 to +20 hPa
Precisión	±0.01 InH2O (-1.20 to +1.20 InH2O) / ±0.03 hPa (-3.00 to +3.00 hPa) ±1.5 % of mv (Remaining Range)
Resolución	0.01 InH2O / 0.01 hPa

Efficiency (calculated)
Rango de medición	0 to 120 %
Resolución	0.1 %

Flue Gas loss (calculated)
Rango de medición	0 to 99.9 %
Resolución	0.1 %

Flue Gas CO2 calculation (calculated from O2)
Rango de medición	0 to CO2 max (Display range)
Precisión	±0.2 Vol.%
Resolución	0.1 Vol.%
Reaction time t90	< 40 sec

Medición de la presión
Rango de medición	-16 to +16 InH2O / -40 to +40 hPa
Precisión	±0.2 InH2O / ±0.5 hPa
Resolución	0,1 InH₂O / 0,1 hPa

Flue gas CO (without H2-compensation)
Rango de medición	0 4000 ppm
Precisión	±20 ppm (0 to 400 ppm) ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm)
Resolución	1 ppm
Reaction time t90	60 sec

Ambient CO
Rango de medición	0 4000 ppm
Precisión	±20 ppm (0 to 400 ppm) ±5 % of mv (401 to 2000 ppm) ±10 % of mv (2001 to 4000 ppm)
Resolución	1 ppm
Tiempo de reacción	60 sec

Datos técnicos generales
Garantía	Instrument: 24 months Gas sensors: 24 months Thermocouple 12 months rechargeable battery: 12 months Probe: 24 months
Tipo de pantalla	LCD
Función de visualización	Backlit 2-line display
Fuente de alimentación	Battery: 1500 mAh, mains unit 5V/1A
Temperatura de almacenamiento	- De4° a 122 °F / De -20 a +50 °C
Peso	(with probe) Approx. 25 oz. / (with probe) Approx. 700 g
Dimensiones	8 x 3 x 2 in. / 201 x 83 x 44 mm
Temperatura de funcionamiento	23° to 113 °F / -5 to +45 °C