Descripción
UEi C161C Residential Combustion Analyzer with Flue Probe and Hard Carrying Case
Don't miss out on the great benefits of UEi Service+.
Register your combustion analyzer
with UEi and get notified when its time to recertify.
Backed by UEi Service+ to allow up to 10 years' warranty, same day recertification and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections and altitude compensation. Prints to optional printer. Essential information for the installation and maintenance of furnaces and boilers.
C161 has two types of sensor protection; a NOx filtered CO sensor and Low Flow Detection. It also has sensor technology that reduces the cost of ownership, a Heat Exchanger test to check the exchanger integrity, and differential temperature. The C161 comes with high altitude compensation to maintain accurate readings at any altitude, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.
The C161 has a 6-Line display to view readings on one screen, which is a favorite among technicians. The DMM Style
dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light
to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to
print to an optional printer sold separately, making it easy to document test results for later analysis.
NOTE: CO-AirFree (COa) Calculation can be set to be displayed in the AUX screen.
Características y funciones del producto:
- Hasta 6 años de garantía con recertificación anual
- 2 Tipos de protección de sensores
- NOx filtrado
- Entradas de temperatura de tipo K
- Cálculo de CO-AirFree (COa)
- Detección de bajo caudal
- Diferencial de temperatura
- Pantalla retroiluminada de 6 líneas
- 8 combustibles preprogramados
- Tiempo de arranque de 30 segundos
- Compensación por altitud elevada
- 30 posiciones de memoria
- Trampa de agua de protección
- Purga automática de aire fresco
- Soporte magnético
- Conexión para impresora IR (impresora no incluida)
Backed by UEi Service+ to give up to 10 years of warranty, SAME DAY GUARANTEED recertification, and a reduced cost of ownership.
- Garantía de 10 años: Todos los analizadores de combustión de UEi cuentan con una garantía estándar de 1 año. Cada recertificación incluye una inspección completa y amplía la garantía un año más, hasta un máximo de 10 años a partir de la fecha de compra.
- Servicio en el mismo día: Todos los analizadores que cumplan los requisitos y se reciban para su recertificación a través de UEi Service+ se devuelven el mismo día laborable, garantizado. (48 horas para los analizadores que tengan instalado un sensor de NO (óxido nítrico) .)
- Envío gratuito: UEi Service+ ofrece envío gratuito tanto hacia como desde su centro de servicio. Cuando los clientes reservan su recertificación, reciben una etiqueta de envío prepagada de UPS Ground.
UEi Service+ wins the 2024 Dealer Design GOLD Award for Contractor Services and Software
Return Eligibility: This product is covered by our standard 30-day return policy. Opened or used products are inspected before refund approval and may be subject to restocking, inspection, calibration, refurbishment, or replacement-part charges based on their returned condition.
Características técnicas
| Medición de la temperatura | |||
|---|---|---|---|
| Parámetro | Gama | Resolución | Precisión |
| Temperatura de los gases de combustión | De 32° a 1112°F (de 0° a 600°) | 0,1 °F (0,1 °C) | ±0,5 °F (0,5 °C) |
| Temperatura de entrada (sensor interno) | 0,1 °F (0,1 °C) | ±1 °F (1 °C) | |
| Temperatura de entrada (sensor externo) | De 32° a 1112°F (de 0° a 600°) | 0,1 °F (0,1 °C) | ±0,5 °F (0,5 °C) | Medición de gases de combustión |
| Parámetro | Gama | Resolución | Precisión |
| Monóxido de carbono | De 0 a 2000 ppm | 1 ppm | ±3 ppm o ±5 % de la lectura (el valor que sea mayor) |
| (Opcional: H2 compensado (si procede)) | De 2.000 a 10.000 ppm | 1 ppm | ±10 % de la lectura |
| Dióxido de carbono | Del 0 al 20 % | 0.1% | ±0,3 % en volumen | Cálculos |
| Parámetro | Gama | Resolución | Precisión |
| Oxígeno | Del 0 al 21 % | 0.1% | ±0,3 % en volumen |
| Rendimiento (neto o bruto) | Del 0 al 99,9 % | 0.1% | ±1 % de la lectura |
| Alta eficiencia (C) | Del 0 al 119,9 % | 0.1% | ±1 % de la lectura |
| Exceso de aire | Del 0 al 119,9 % | 0.1% | ±0,2 % de la lectura |
| Relación CO/CO₂ | De 0 a 0,9999 | 0.0001 | ±5 % de la lectura |
| CO-AirFree (COa) | De 0 a 9999 ppm | 1 PPM | ±5 % de la lectura | General |
| Combustibles preprogramados | Pellets, gasóleo ligero, GLP, butano, propano, gas natural, bioaceite, gasóleo pesado | ||
| Duración de la batería | >8 horas (de forma continua con la bomba encendida) | ||
| Certificación | The C160 Series is TUV-tested and certified to EN 50379, Parts 1-3 in accordance to 1st German Federal Emission Control Ordinance (BimSchV) | ||
| Temperatura de funcionamiento | De 32° a 113°F (de 0° a 45°C) | ||
| Humedad de funcionamiento | Del 15 % al 90 % de humedad relativa. | ||
| Fuente de alimentación | Baterías recargables, carga por USB | ||
| Dimensiones | 8,54" x 4,18" x 1,86" | ||
| Peso | 1 libra y 5,1 onzas. | ||
Incluye
- (1) Analizador de gases de combustión UEI C161
- (1) Sonda para conductos de humos con cono y manguera
- (3) Pilas recargables AA
- (1) Cable de carga USB
- (1) Estuche rígido
- (1) Guía de inicio rápido
Vídeos