UEI C165+ Residential / Commercial Combustion Analyzer

UEI C165+ Residential / Commercial Combustion Analyzer

Don't miss out on the great benefits of UEi Service+.
Register your combustion analyzer with UEi and get notified when its time to recertify.

Backed by UEi Service+ to allow up to 10 years’ warranty, same day recertification and a reduced cost of ownership. The C165+ Residential/Commercial Combustion Analyzer is easy to use with a rugged design, multiple sensor protections, altitude compensation and differential pressure. Prints to optional printer and wireless App. LINK connects the included wireless pipe clamp temperature probes and other optional probes to the C165+. Essential information for the installation and maintenance of furnaces and boilers – all in one place.

C165+ enables a LINK feature to connect to wireless probes. The LINK feature connects to the 2 wireless temperature pipe clamps (WPC2), which can be used to compare flow and return temperatures on a boiler. C165+ LINK also connects the optional DTHA2 (sold separately) to measure air flow. Contractors can use the Room CO test to take snap shots of ambient CO readings to view trending CO levels. C165+ has four types of sensor protection; an H2 compensated 10,000 ppm CO sensor, CO over-range purge pump, a NOx filtered CO sensor, and Low Flow Detection to protect the CO sensor. It offers differential pressure and has wireless capabilities to a Printer App for compatible iOS and Android devices. It also has sensor technology that reduces the cost of ownership. It features a Heat Exchanger test to check the exchanger integrity and differential temperature. The C165+ comes with High Altitude compensation to maintain accurate readings, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.

The C165+ has a 6-Line display to view readings on one screen, which is a favorite among technicians. The DMM style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to the optional IR thermal printer, making it easy to document test results for later analysis.
NOTE: CO-AirFree (COa) Calculation can be set to be displayed in the AUX screen.

Características y funciones del producto:

• Hasta 6 años de garantía con recertificación anual
• 3 tipos de protección de sensores
• NOx filtrado
• Link to Wireless Probes
• Entradas de temperatura de tipo K
• Cálculo de CO-AirFree (COa)
• Detección de bajo caudal
• Bomba de protección contra sobrecarga
• Diferencial de temperatura
• Pantalla retroiluminada de 6 líneas
• Entrada de doble presión
• Presión diferencial
• 8 combustibles preprogramados
• Tiempo de arranque de 30 segundos
• Compensación por altitud elevada
• 30 posiciones de memoria
• Trampa de agua de protección
• Purga automática de aire fresco
• Soporte magnético
• Conexión para impresora IR (impresora no incluida)

---

Con el respaldo de UEi Service+, que ofrece hasta 10 años de garantía, recertificación GARANTIZADA EN EL MISMO DÍA y un menor coste de propiedad.

• Garantía de 10 años: Todos los analizadores de combustión de UEi cuentan con una garantía estándar de 1 año. Cada recertificación incluye una inspección completa y amplía la garantía un año más, hasta un máximo de 10 años a partir de la fecha de compra.
• Servicio en el mismo día: Todos los analizadores que cumplan los requisitos y se reciban para su recertificación a través de UEi Service+ se devuelven el mismo día laborable, garantizado. (48 horas para los analizadores que tengan instalado un sensor de NO (óxido nítrico) .)
• Envío gratuito: UEi Service+ ofrece envío gratuito tanto hacia como desde su centro de servicio. Cuando los clientes reservan su recertificación, reciben una etiqueta de envío prepagada de UPS Ground.

Return Eligibility: This product is covered by our standard 30-day return policy. Opened or used products are inspected before refund approval and may be subject to restocking, inspection, calibration, refurbishment, or replacement-part charges based on their returned condition.