Descripción
Veto Pro Pac MB3TB Sling-Style Large Meter and Tool Bag with V-SWAP Removable Tool Pocket Inserts
Durable Storage for Digital Manifolds, Hand Tools, and Wireless Probes
The MB3TB is a large, compact sling-style meter and tool bag, built on an impact and water-resistant injection molded polypropylene base. Designed to store, transport, and protect large meters- including digital manifolds and meters up to 13.5" (34 cm) tall- it also includes a pair of removable tool pocket inserts that provide up to six vertical storage pockets for hand tools in the main compartment. The back and interior pockets are suitable for storing wireless probes. It features a removable sling strap and carrying handle, allowing you to use it as either a sling bag or carry it at your side. Removable backpack straps (available separately) allow you to convert the MB3TB into a small, compact backpack.
Características y ventajas principales
- Large main pocket with five padded interior pockets
- Two removable tool pocket inserts provide up to six vertical storage pockets for hand tools in the main compartment
- Up to 25 internal and external storage pockets
- Rear padded pocket for a small tablet, probes, or additional tools
- Impact- and water-resistant injection-molded base
- Removable sling-style shoulder strap
- Detachable carrying handle
- Built-in hanging hook for convenient storage
- Four integrated D-rings
- Electrical tape strap
- Heavy-duty YKK® zippers
- 5-Year Limited Warranty
Características técnicas
| Max Payload | 25 lbs (11.5 kg) |
| Weight (empty) | 402 lbs (1.9 kg) |
| Altura | 14 in (35.5 cm) |
| Profundidad | 7 in (17.8) |
| Ancho | 11 in (28 cm) |
| Garantía | 5 year limited |
Incluye
- (1) Veto Pro Pac MB3TB Sling-Style Large Meter and Tool Bag
- (2) V-SWAP™ Large Tool Pockets
Recursos
Veto Pro Pac MB3TB Tool and Meter Pouch Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed... proceed with caution!