Descripción
Veto Pro Pac PROBE HAULER Closed Top HVAC Smart Probe Storage Bag
The ultimate bag for HVAC smart probes
The PROBE HAULER is a compact, closed-top bag specifically designed to store a full set of HVAC smart probes, basic hand tools, and essential items for checking temperature, humidity, and refrigerant levels on HVAC systems. The main compartment is accessed via a quick-access flap, which features an internal zippered vinyl-coated mesh pocket for small miscellaneous items like Schrader cores and locking caps. Inside the main compartment are four vertical smart probe storage pockets and a removable padded insert divider with five compartments, designed to accommodate up to three temperature clamps and four additional smart probes. The bag also features four external tool pockets for hand tools, a front Velcro pocket for core removers, a rear tarpaulin-covered pocket for gloves or short refrigerant hoses, a hanging hook for easy accessibility, and an injection-molded base to keep the bag upright and protected at all times.
Características y ventajas principales
- Tarpaulin covered top-down flap access with an internal zippered, vinyl-coated mesh pocket
- Front access Velcro pocket
- 11 total pockets
- Removable padded insert divider with 5 compartments
- Tarpaulin covered rear pocket for added weather & abrasion protection
- Hang-up hook
- Detachable over-molded elastomeric grip
- 2 D-rings
- YKK® zippers
- Waterproof polypropylene plastic base for moisture and abrasion protection
- 5 Year Manufacturer Defect Warranty
Características técnicas
| Max Payload | 15 lbs (7 kg) |
| Internal Volume | 279 in3 (4.6 L) |
| Weight (empty) | 2.7 lbs (1.2 kg) |
| Altura | 10" (25.5 cm) |
| Profundidad | 8" (20.3 cm) |
| Ancho | 10" (25.5 cm) |
| Garantía | 5 year limited |
Incluye
- (1) Veto Pro Pac PROBE HAULER Closed Top HVAC Smart Probe Storage Bag
- (1) 5 Pocket Padded Insert Divider
Recursos
Veto Pro Pac PROBE HAULER Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed... proceed with caution!