null

Fieldpiece Professional Job Link Kit for measureQuick with Pressure and Electrical - TTT Exclusive

SKU:
FPJK-MQ-EP
MPN:
FPJK-MQ-EP
Works with measureQuick?:
Yes
  • Fieldpiece Professional Job Link Kit for measureQuick with Pressure and Electrical - TTT Exclusive
  • Fieldpiece JL3KH6 Job Link Charge and Air Kit
  • Fieldpiece JL3KM2 Job Link Dual Manometer Kit
  • Redfish iDVM 550 Wireless BlueTooth Power Clamp Meter
MSRP: $1,362.31
Price: $1,319.95
— You save $42.36
  • Fieldpiece JL3PC Premium Pipe Clamp Probe (1/4" - 1 3/8")

Description

TruTech Tools EXCLUSIVE Professional Job Link Kit for measureQuick with Pressure and Electrical

Incorporating Fieldpiece and Redfish products. Works with measureQuick!

Kit Includes:

  • (1) Fieldpiece Dual Manometer Kit
    • (2) Manometer Probe
    • (2) Static Pressure Probe and Hose
    • (2) Brass Screw Fitting with Extra Hose
    • (2) Slide Gas Adapter
    • (1) Padded Case
    • (4) AAA Batteries
  • (1) Fieldpiece JL3KH6 Job Link Charge and Air Kit
    • (2) Job Link Pipe Temp Probes
    • (2) Job Link Pressure Probes
    • (2) Job Link Psychrometer Probes
    • (1) Padded Carrying Case
    • (12) AAA Batteries
  • (1) Job Link Psychrometer Probe
  • (1) Redfish iDVM 550 Wireless BlueTooth Power Clamp Meter
  • (2) A-303 Magnetic Static Pressure Tips
  • (2) CPS 1/4" SAE Tee Valve Connectors
  • (2) CPS 1/4" Brass Caps

Take a full system snapshot quickly and easily with the TTT Exclusive Professional Job Link Kit for measureQuick. This kit consists of 2 pressure probes, 2 pipe clamps, and 3 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers' flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with JobLink smart probes!

The Redfish iDVM 550 clamp power meter with Bluetooth Low Energy (BLE) is a hand held meter that combines both reliable and robust measurement capabilities with the connectivity to mobile devices provided by BLE. The meter provides the ability to measure AC current, AC/phase/power factor (PF), and non contact voltage (NCV). Dwyer A-303 Static pressure tips are required for accurate static pressures when measured in ducts, across filters, coils or heat exchangers. These magnetic tips allows for hands free use and quick accurate measurement.

Fieldpiece JL3KH6 Job Link Charge and Air Kit

Powerful, Long Range and Easy

Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with JobLink smart probes!

Wireless range of 1000'

  • Directly connects to mobile device with Job Link System App. iOS and Android compatible.
  • Fast accurate temps with new Rapid Rail technology
  • Pressures auto calibrate at any elevation
  • Configurable psychrometers with flexible probe and sliding magnet

Powerful Wireless Signal Strength

  • Up to 1000' wireless signal
  • Powerful enough to go through most walk-in coolers and freezers
  • Directly transmits to your mobile device

Rapid Rail Sensor Advantages

  • Stabilizes in under 5 seconds
  • Beeper and LED indicate accurate connection
  • The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don't affect the measurement
  • Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

  • 45° angled fitting easily connects in tight spaces
  • Pressure sensors are accurate at any elevation
  • Calibrates automatically when powered on

Configurable Psychrometric Testing

  • Probes measure return and supply for grilles and registers
  • Place at multiple locations based on system requirements
  • Long flexible probe with sliding magnet for easy placement on system
  • Narrow tip fits in 3/8" holes or larger
  • Real time enthalpy and delivered BTUs

Fieldpiece JL3KM2 Job Link Dual Manometer Kit

Do more with less clutter!

You know taking pressures from exact locations results in more precise diagnostics, so why be limited by hose length? The revolutionary new Dual Port Manometers from Fieldpiece aren't tethered by hoses, so you get readings from optimal locations on every system, every time.

Short hose length keeps things neat, and independent sensors allow for direct placement on test ports. Measure between zones without snaking a hose past the door where it can be pinched. Dial in gas pressure of a furnace. Optimize total external static pressure of equipment. Pinpoint duct leaks and restrictions. Increase comfort and do more.

Features:

  • Reliable pressure regardless of location
  • Measure real-time pressure drops
  • Find inlet and outlet gas pressures
  • Switchable P1 - P2 indicator
  • Job Link System App compatible
  • Easy zero to atmosphere
  • 1000' long-range wireless
  • Rugged metal tips
  • All-in-one static, gas, and draft pressure
  • Accurate and stable measurements
  • Measure between zones without snaking a hose under the door
  • Strong rotating magnet
  • Untethered usage
  • Individual pressure readouts give you P1, P2, and pressure differential in real-time
  • All accessories for static and gas applications included
  • Document system health in Job Link App reporting

View static pressures or gas pressures from the new Fieldpiece manometer probes directly on the Job Link App -- up to 1000' away! Unlike traditional dual port manometers, the JL3MN probes work independently so you don't have to bother with long hoses. This modular freedom also gives you real-time differential pressures from across the job site. Place probes in precise locations regardless of system set up. From gas pressures of residential furnaces to the total external static pressure on commercial air handlers, you now have the versatility you've always needed.


Redfish iDVM 550 Wireless Power Clamp Meter 

Professional-grade multimeter and amp clamp with power measurements

The Redfish iDVM 550 clamp power meter with Bluetooth Low Energy (BLE) is a hand held meter that combines both reliable and robust measurement capabilities with the connectivity to mobile devices provided by BLE. The meter provides the ability to measure AC current, AC/phase/power factor (PF), and non contact voltage (NCV).

Determine system efficiency with this professional grade Clamp Meter by measuring AC Volts, AC Amps, system kW and the power factor. Test everything from capacitors to compressors to even determining the EER on an AC system. Use App-captured data on MeasureQuick or the Supco® TechLink to discuss system operating costs on jobs.

In addition to the measurement capabilities of the meter, it also provides the following features:

  • Jaw opening 40mm/1.6"
  • Auto-ranging or manual ranging selectable
  • Automatic power shutoff after 1 minute of detected inactivity
  • True RMS
  • Inrush current measurement
  • Display backlight and clamp flashlight (while in current mode)
  • Low voltage indicator on display
  • Relative measurement
  • Reading hold function
  • Max and Min measurement
  • IP54 - ingress protection from dirt and water
  • Ability to turn off the BLE to extend battery life
  • 1 year Warranty

Specs

Fieldpiece JL3RH Flex Psychrometer Probe

Minimum Device Requirement: BLE 4.0 devices running iOS 7.0 or Android 5.0
Battery Type: 2 x AAA, NEDA 24A, IEC LR03
Battery Life: 150 hours typical alkaline (LED blinks red when battery replacement is needed)
Auto Power Off: 2 hours (APO can be disabled)
Wireless Range: 1000 feet (305 meters) line of sight (obstructions affect distance)
Radio Frequency: 2.4 GHz
Operating Environment: -4°F to 122°F (-20°C to 50°C) at <75% RH
Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
Temperature Coefficient: 0.1 x (specified accuracy) per 0.6°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
Weight: 0.33 lbs (150 g)
Flexible Probe: 0.36" (9mm) diameter; 9.25" (235mm) length
Relative Humidity (%RH): Sensor Type: Capacitance polymer film
Hysteresis: ±1%RH typical (Excursion of 10% to 90% to 10%RH)
Measurement Range: 0%RH to 100%RH
Accuracy: (At 73.4°F (23°C)) ±2.5% (10%RH to 90%RH); ±(5%) <10%RH,> 90%RH
Response Time: 60 seconds typical for 90% of total range
Temperature: Sensor Type: Precision thermistor
Measurement Range: -4°F to 140°F (-20°C to 60°C)
Accuracy: ±(1°F) 32°F to 113°F, ±(0.5°C) 0°C to 45°C; ±(2°F) -4°F to 32°F, 113°F to 140°F, ±(1°C) -20°C to 0°C, 45°C to 60°C




Fieldpiece JL3PR Pressure Probe

Minimum Device Requirement: BLE 4.0 devices running iOS 7.0 or AndroidTM 5.0
Sensor Type: Relative pressure
Connector Type: Standard 1/4" SAE (angled)
Measurement Range: 29" HgV to 580 psig, 74 cmHgV to 0 to 4000 kPa
Accuracy: 29" HgV to 0" HgV: ±0.2" HgV
74 cmHgV to 0 cmHgV: ±1 cmHgV
0 to 200 psig: ±1 psig
0 to 1378 kPa: ±7 kPa
200 to 580 psig: ±2 psig
1378 to 4000 kPa: ±14 kPa
Maximum Overload Pressure: 800 psig (5500 kPa)
Battery Type: 2 x AAA, NEDA 24A, IEC LR03
Stabilization Time: 3 seconds typical
Battery Life: 150 hours typical alkaline (LED blinks red when battery replacement is needed)
Auto Power Off: 2 hours (APO can be disabled)
Wireless Range: 1000 feet (305 meters) line of sight
Radio Frequency: 2.4 GHz
Operating Environment: -4°F to 122°F (-20°C to 50°C) at <75% RH
Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
Temperature Coefficient: 0.1 x (specified accuracy) per 0.6°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
Weight: 0.39 lbs (177 g)
Water Resistant: Designed to IP55




Fieldpiece JL3PC Premium Pipe Clamp Probe (1/4" - 1 3/8")

Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or AndroidTM 5.0
Pipe Contact Surface Compatibility: Electrically conductive
Pipe Size Compatibility: 1/4" to 1 3/8" (6.4mm to 34.9mm) OD
Sensor Type: Rapid Rail thermocouple (nickel chromium / nickel aluminum)
Measurement Feedback: Beeper and LED
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: 3 seconds typical
Accuracy: ±1.0°F (±0.6°C) (meets California's Title 24 requirements)
Battery Type: 2 x AAA, NEDA 24A, IEC LR03
Battery Life: 150 hours typical alkaline (LED blinks red when battery replacement is needed)
Auto Power Off: 2 hours (APO can be disabled)
Wireless Range: 1000 feet (305 meters) line of sight
Radio Frequency: 2.4 GHz
Operating Environment: -4°F to 122°F (-20°C to 50°C) at <75% RH
Storage Temperature: -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with batteries removed)
Temperature Coefficient: 0.1 x (specified accuracy) per 0.6°F (32°F to 64°F, 82°F to 122°F), per 1°C (0°C to 18°C, 28°C to 50°C)
Weight: 0.33 lbs (150 g)
Water Resistant: Designed to IP55
Patent: Pending

Plastic body and wire insulation are designed to withstand a maximum continuous temperature of 257°F (125°C)
Obstructions affect distance





Fieldpiece Job Link Manometers

Wireless Range 1000 feet (305 meters) line of sight
Wireless Frequency 2.4 GHz
Battery 2 AAA (included)
Battery Life 150 hours typical alkaline
Auto Power Off 2 hours (can be disabled)
Best Accuracy and Range inWC: ±0.02 on 0.00 to ±2.00
(±1.5% FS on 2.00 to ±60.00)

mmWC: ±0.5 on 0.0 to ±51.0
(±1.5% FS on 51.0 to ±1500.0)

mbar: ±0.05 on 0.00 to ±5.00
(±1.5% FS on 5.00 to ±150.00)

psi: ±0.001 on 0.000 to ±0.072
(±1.5% FS on 0.072 to ±2.165)

Pa: ±5 on 0 to 498
(±1.5% FS on 498 to ±14930)
Maximum Overload Pressure 305 inWC (11 psi)




Redfish iDVM 550 Wireless BlueTooth Power Clamp Meter

Redfish Model iDVM 550 Clamp Meter
Type Single Phase Power Clamp Meter
Specifications Ranges Accuracy
DC Voltage 6V/60V/600V ±(0.5% + 5)
1000V ±(0.8% + 4)
AC Voltage 6V/60V/600V ±(0.6% + 5)
750V ±(0.8% + 4)
AC Current 60A/600A/1000A ±(2.0% + 8)
Active Power 3.6W~~750KW ±(3.0% + 5)
Apparent Power 3.6VA~~750KVA ±(3.0% + 5)
Reactive Power 3.6VAr~~750KVAr ±(3.0% + 5)
Power Factor 0.3~~1 ±(0.02% + 2)
Frequency From V&A 40~1KHz ±(0.5% + 1)
Harmonic
Measurement
Harmonic Number: 1 ±(3.0% + 10)
Harmonic Number: 2~6 ±(3.5% + 10)
Harmonic Number: 7~8 ±(4.5% + 10)
Harmonic Number: 9~10 ±(5.0% + 10)
Harmonic Number: 11~15 ±(7.0% + 10)
Harmonic Number: 16~20 ±(10% + 10)
Resistance 600O/6kO/60kO/600kO ±(0.8% + 3)
6MO/60MO ±(2.0% + 5)
Capacitance 9.999nF/ 99.99nF/ 999.9nF/
9.999µF/ 99.99µF/ 999.9µF/
9.999mF/ 99.99mF
±(3.0% + 5)
Frequency From Hz 9.999Hz/ 99.99Hz/ 999.9Hz/
9.999KHz/ 99.99KHz/
999.9KHz/ 9.999MHz/
±(0.3% + 5)
Duty Cycle 0.1%-99.9% ±(3.0% + 3)
Functions Features
Display Counts 6000 3-3/4 digit resolution
Auto Range Yes
Manual Range Yes
Relative Range Yes
True RMS Yes
Inrush Current Yes (Current)
NCV Yes
Diode Yes <=3V
Continuity Yes <50O
Max/MIN Yes
Data Hold Yes
Auto Power Off Yes (30 min)
Low Bat. Display Yes
Display Backlight Yes (1 min)
Worklight Yes
Lead Holder Yes
BlueTooth Yes
Housing Double Molding
Power Supply 9V
Saftey Rating CAT III 1000V
Certification CE/ ETL, rated to IEC/EN61010 Safety Standards


Details on InRush Current Measurement:

The surge in current at the start up of many electrical devices is called the InRush current. It often embodies the energy required to "get things moving" and rapidly drops to the running current of the device. You must use a specially designed clamp type meter (like the Redfish iDVM 550) to measure InRush. The iDVM 550 is the least expensive meter that we have found that incorporates the InRush feature.

  1. Simply turn on the iDVM 550 and "clamp" the meter around the Hot wire.
  2. Switch the selector to InRush and turn the equipment on.
  3. The inrush current (spike) is displayed in the meter's display.

Inrush current may be higher than the rating of the device's circuit breaker, yet the breaker (or overload) does not trip as it is a function of total energy or time vs current. It is common to see InRush currents that are 4 to 10 times greater than the normal running current. InRush current analysis is often done over time in conjunction with preventive maintenance, thus allowing you to watch a system trend and see if the motor or motor circuitry is degrading.

Learn more about InRush current applications at the HVACRSchool.com

Includes

  • (1) Fieldpiece Dual Manometer Kit
    • (2) Manometer Probe
    • (2) Static Pressure Probe and Hose
    • (2) Brass Screw Fitting with Extra Hose
    • (2) Slide Gas Adapter
    • (1) Padded Case
    • (4) AAA Batteries
  • (1) Fieldpiece JL3KH6 Job Link Charge and Air Kit
    • (2) Job Link Pipe Temp Probes
    • (2) Job Link Pressure Probes
    • (2) Job Link Psychrometer Probes
    • (1) Padded Carrying Case
    • (12) AAA Batteries
  • (1) Job Link Psychrometer Probe
  • (1) Redfish iDVM 550 Wireless BlueTooth Power Clamp Meter with Line Splitter
  • (2) A-303 Magnetic Static Pressure Tips
  • (2) CPS 1/4" SAE Tee Valve Connectors
  • (2) CPS 1/4" Brass Caps

Videos

Learn more with this Job Link How To's video playlist.



Software / App

MeasureQuick Logo

The measureQuick App supercharges a variety of BlueTooth smart tools with rich diagnostics, data logging and reporting capabilities. Now you can see intuitive visuals informing about each job, piece of equipment, or system all in one place!

Download the measureQuick App for your Android or iOS devices

Google Play Store Apple App Store

App / Device Compatibility

  • Requires mobile device with Bluetooth 4.0
View AllClose