Fieldpiece Professional Job Link® Kit for measureQuick with Pressure and Electrical - TTT Exclusive

TruTech Tools EXCLUSIVE Professional Job Link® Kit for measureQuick with Pressure and Electrical

Incorporating Fieldpiece and Redfish products. Works with measureQuick!

Kit Includes:

• (1) Fieldpiece Dual Manometer Kit
• (2) Manometer Probe
• (2) Static Pressure Probe and Hose
• (2) Brass Screw Fitting with Extra Hose
• (2) Slide Gas Adapter
• (1) Padded Case
• (4) AAA Batteries
• (1) Fieldpiece JL3KH6 Job Link® Charge and Air Kit
• (2) Job Link® Pipe Temp Probes
• (2) Job Link® Pressure Probes
• (2) Job Link® Psychrometer Probes
• (1) Padded Carrying Case
• (12) AAA Batteries
• (1) Job Link® Psychrometer Probe
• (1) Redfish iDVM 550 Wireless BlueTooth Power Clamp Meter
• (2) A-303 Magnetic Static Pressure Tips
• (2) CPS 1/4" SAE Tee Valve Connectors
• (2) CPS 1/4" Brass Caps

Take a full system snapshot quickly and easily with the TTT Exclusive Professional Job Link® Kit for measureQuick. This kit consists of 2 pressure probes, 2 pipe clamps, and 3 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link® app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers' flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link® smart probes!

The Redfish iDVM 550 clamp power meter with Bluetooth Low Energy (BLE) is a hand held meter that combines both reliable and robust measurement capabilities with the connectivity to mobile devices provided by BLE. The meter provides the ability to measure AC current, AC/phase/power factor (PF), and non contact voltage (NCV). Dwyer A-303 Static pressure tips are required for accurate static pressures when measured in ducts, across filters, coils or heat exchangers. These magnetic tips allows for hands free use and quick accurate measurement.

Fieldpiece JL3KH6 Job Link® Charge and Air Kit

Powerful, Long Range and Easy

Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit. This kit consists of 2 pressure probes, 2 pipe clamps, and 2 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link® app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link® smart probes!

Wireless range of 1000'

• Directly connects to mobile device with Job Link® System App. iOS and Android compatible.
• Fast accurate temps with new Rapid Rail technology
• Pressures auto calibrate at any elevation
• Configurable psychrometers with flexible probe and sliding magnet

Powerful Wireless Signal Strength

• Up to 1000' wireless signal
• Powerful enough to go through most walk-in coolers and freezers
• Directly transmits to your mobile device

Rapid Rail Sensor Advantages

• Stabilizes in under 5 seconds
• Beeper and LED indicate accurate connection
• The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don't affect the measurement
• Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

• 45° angled fitting easily connects in tight spaces
• Pressure sensors are accurate at any elevation
• Calibrates automatically when powered on

Configurable Psychrometric Testing

• Probes measure return and supply for grilles and registers
• Place at multiple locations based on system requirements
• Long flexible probe with sliding magnet for easy placement on system
• Narrow tip fits in 3/8" holes or larger
• Real time enthalpy and delivered BTUs

Fieldpiece JL3KM2 Job Link® Dual Manometer Kit

Do more with less clutter!

You know taking pressures from exact locations results in more precise diagnostics, so why be limited by hose length? The revolutionary new Dual Port Manometers from Fieldpiece aren't tethered by hoses, so you get readings from optimal locations on every system, every time.

Short hose length keeps things neat, and independent sensors allow for direct placement on test ports. Measure between zones without snaking a hose past the door where it can be pinched. Dial in gas pressure of a furnace. Optimize total external static pressure of equipment. Pinpoint duct leaks and restrictions. Increase comfort and do more.

Features:

• Reliable pressure regardless of location
• Measure real-time pressure drops
• Find inlet and outlet gas pressures
• Switchable P1 - P2 indicator
• Job Link® System App compatible
• Easy zero to atmosphere
• 1000' long-range wireless
• Rugged metal tips
• All-in-one static, gas, and draft pressure
• Accurate and stable measurements
• Measure between zones without snaking a hose under the door
• Strong rotating magnet
• Untethered usage
• Individual pressure readouts give you P1, P2, and pressure differential in real-time
• All accessories for static and gas applications included
• Document system health in Job Link® App reporting

View static pressures or gas pressures from the new Fieldpiece manometer probes directly on the Job Link® App -- up to 1000' away! Unlike traditional dual port manometers, the JL3MN probes work independently so you don't have to bother with long hoses. This modular freedom also gives you real-time differential pressures from across the job site. Place probes in precise locations regardless of system set up. From gas pressures of residential furnaces to the total external static pressure on commercial air handlers, you now have the versatility you've always needed.

Redfish iDVM 550 Wireless Power Clamp Meter 

Professional-grade multimeter and amp clamp with power measurements

The Redfish iDVM 550 clamp power meter with Bluetooth Low Energy (BLE) is a hand held meter that combines both reliable and robust measurement capabilities with the connectivity to mobile devices provided by BLE. The meter provides the ability to measure AC current, AC/phase/power factor (PF), and non contact voltage (NCV).

Determine system efficiency with this professional grade Clamp Meter by measuring AC Volts, AC Amps, system kW and the power factor. Test everything from capacitors to compressors to even determining the EER on an AC system. Use app-captured data on measureQuick or the Supco® TechLink to discuss system operating costs on jobs.

In addition to the measurement capabilities of the meter, it also provides the following features:

• Jaw opening 40mm/1.6"
• Auto-ranging or manual ranging selectable
• Automatic power shutoff after 1 minute of detected inactivity
• True RMS
• Inrush current measurement
• Display backlight and clamp flashlight (while in current mode)
• Low voltage indicator on display
• Relative measurement
• Reading hold function
• Max and Min measurement
• IP54 - ingress protection from dirt and water
• Ability to turn off the BLE to extend battery life
• 1 year Warranty

Software / App

The measureQuick App supercharges a variety of BlueTooth smart tools with rich diagnostics, data logging and reporting capabilities. Now you can see intuitive visuals informing about each job, piece of equipment, or system all in one place!

Download the measureQuick App for your Android or iOS devices

App / Device Compatibility

• Requires mobile device with Bluetooth 4.0