Fluke T5-1000 Electrical Tester
The Fluke T5 Electrical Testers let you check voltage, continuity, and current with one compact tool. With the T5, all you have to do is select volts, ohms, or current and the tester does the rest. OpenJaw current lets you check current up to 100A - without breaking the circuit. It's tough test leads stow neatly in the back of the tester, making it easy to tote the T5 in your tool pouch. Detachable SlimReach test probes are customized for national electrical standards. The test leads accept optional accessories such as clips and specialty probes. The optional H5 holster lets you clip the T5 onto you belt. Available in 600V and 1000V models.
Features:
- Automatically measures volts AC and DC with precise digital resolution
- Displays resistance to 1000?
- Easy and accurate OpenJaw current measurement
- Continuity beeper
- Compact design with neat probe storage
- Rugged enough to withstand a 10-foot (3m) drop
- Detachable SlimReach probe tips are customized for national electrical standards
- Test leads accept Fluke accessory test clips
- Available in 600V and 1000V models
- Can stay connected much longer than solenoid type tester
- Auto off mode to conserve battery life
- Optional holster attaches to a belt and neatly stows test leads
Specs
| Specifications |
| Continuity beeper | | Threshold: | On at <25 O, off at >400 O | |
| Volts indicator LED | | Threshold: | Guaranteed on by 30V ac | |
| Environmental Specifications |
| Operating Temperature | |
| Storage Temperature | |
| Humidity (Without Condensation) |
| 0% to 95% (5 °C to 30 °C) |
| 0% to 75% (30 °C to 40 °C) |
| 0% to 45% (40 °C to 50 °C) | |
| Dust/water resistance | |
| Operating Altitude | |
| Temperature Coefficient |
| 0.1 x (specified accuracy)/degree C (<18 °C or >28 °C) | |
| Safety Specifications |
| Overvoltage category | | T5-600: | 600V ac/dc, CAT III | | T5-1000: | 1000V ac/dc, CAT III
600V ac/dc, CAT IV | |
| Agency Approvals | |
| Maximum voltage |
| between any terminal and earth ground | |
| Mechanical & General Specifications |
| Size | |
| Weight | |
| Warranty | |
| Battery Life |
| 200 hour zinc chloride, 400 hour alkaline | |
| Battery type | |
| Low battery indicator | |
| Current sensor opening | |
| Calibration cycle | |
| Test leads | | Type: | Heavy duty, flexible leads rated for 1000V use. |
| Field replaceable leads terminate in male shrouded banana plugs | | Probes: | One red, one black. of two tip |
| Detachable Slim-ReachT probe tips in one | | Styles: | TP1 Slim Reach Test Probes | |
