Description
Testo Professional Smart Probe Kit for measureQuick with Pressure and Electrical
Works with measureQuick!
- (1) Testo 0563 0009 Smart Probes AC / Refrigeration Capacity Test Kit
- (2) Testo 115i Pipe Clamp Thermometer Smart Probe - 2nd Gen
- (2) Testo 549i Refrigeration Pressure Smart Probe - 2nd Gen
- (2) Testo 605i Humidity Smart Probe - 2nd Gen
- (18) AAA Batteries
- (1) Testo HVAC Softcase
- (1) Certificate of Calibration
- (1) Testo 510i Differential Pressure Smart Probe
- (1) Testo 605i Humidity Smart Probe - 2nd Gen
- (1) CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS
- (2) A-303 Magnetic Static Pressure Tips
- (2) CPS 1/4" SAE Tee Valve Connectors
- (2) CPS 1/4" Brass Caps
Take a full system snapshot quickly and easily with the TTT Exclusive Testo Professional Smart Probe Kit for measureQuick. This kit consists of 2 pressure probes, 2 pipe clamps, and 3 psychrometers in a testo soft case. All measurements can be sent up to 350' away directly to your mobile device with the testo smart app.
Dwyer A-303 Static pressure tips are required for accurate static pressures when measured in ducts, across filters, coils or heat exchangers. These magnetic tips allows for hands free use and quick accurate measurement.
Testo Smart Probes AC / Refrigeration Test and Load Kit
Bluetooth range of up to 350 feet. Works with MeasureQuick
The testo AC & Refrigeration test and load kit includes two testo 549i high-pressure measuring instruments, two testo 605i thermohygrometers and two testo 115i clamp thermometers for pressure, (air) temperature and humidity measurement. In conjunction with a smartphone or tablet, the kit is ideally suited to servicing and troubleshooting on air conditioning and refrigeration systems, as well as their installation. The testo 549i and testo 115i can be quickly and easily attached directly at the pressure connection or the temperature measuring point. It is now considerably easier to work at a longer distances, thanks to improved wireless connection to your smartphone or tablet.
The measuring values of both instruments are transmitted via Bluetooth to the testo Smart Probes App installed on your terminal device enabling convenient and flexible readout there. In addition, the App enables automatic calculation of evaporation and condensation temperatures as well as of heating/cooling capacity/output. All measurement data is viewable either as a diagram or a table. Finally, the measurement data report can be e-mailed directly as a pdf or Excel file.
Features:
- Measure high-side & low-side refrigerant pressure & temperatures (simultaneously) of AC/refrigeration systems
- Testo 549i now includes 45° angled hose connections
- Testo 605i now includes 90° foldable probe with built in attachment magnets
- NEW! Bluetooth range of up to 350 feet
- Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
- Calculate superheat and subcooling in the Smart Probe App
- Tough, accurate, and easy-to-use
- HVAC softcase holds the complete set of smart probes
- Operates with iOS or Android smart devices such as smart phones, tablets, etc.
Testo 510i Differential Pressure Smart Probe
- Compact wireless pressure probe for use with iOS and Android devices using free app
- Measurement of static pressure, air flow and volume flow
- Programmable pressure drop alarms
- View data trends on a real time chart or save results as PDF or Excel format
- Obtain timed and multipoint readings
- Create custom reports (with photos and comments) that can be saved or shared via email
- Magnetic back for hand-free operation
Convenient and low cost way to "get digital" in your air conditioning and heating work.
The App turns your smartphone/tablet into the display for the testo 510i.
BlueTooth connectivity to your smart phone or tablet makes the work easier when pressure connections are far apart.
CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS
Easily measure inrush/AC currents, resistance, RMS, and more
The CPS VOLT-100 is a portable, professional multifunction instrument with an LCD display for obtaining electrical measurements. It can be used as a conventional clamp meter or may be paired to Apple & Android smartphones & tablets via Bluetooth for additional functionality.
Key Features & Benefits
- Use with or without the CPS Link app
- Connects to Apple and Android smartphones & tablets via Bluetooth
- Power factoring to determine true power consumption
- Data logging of electrical readings
- Utility data feed calculates actual cost/hour of appliances
- CAT III 1,000 V rating
- True RMS measurements
- Non-contact voltage tester
- Maximum Voltage: 750 V AC; 1000 V DC
- Auto range and manual measuring
- Measuring range overload protection
- Display auto-off
- Display backlight
- Automatic polarity indication
- Max/Min and relative measuring function
Measures
- Inrush current
- AC current
- Resistance
- AC/DC voltage
- Phase angle
- Harmonics
- Frequency
- Capacitance
- Duty cycle
- Diode connection
Specs
| Testo 115i | Testo 549i | Testo 605i | ||
|---|---|---|---|---|
| Sensor type | NTC | Pressure | Humidity – Capacitive | NTC |
| Measuring range | -58 to 302 °F | -14 to 870 psi | 0 to 100 %RH | -4 to 140 °F |
| Accuracy ±1 digit |
±2.3 °F (-4 to 185 °F) | 0.5 % of final value | ±3.0 %RH (10 to 35 %RH) ±2.0 %RH (35 to 65 %RH) ±3.0 %RH (65 to 90 %RH) ±5 %RH (< 10 %RH or> 90 %RH) (at 77 °F) |
±1.4 °F (-4 to 32 °F) ±0.9 °F (32 to 140 °F) |
| Resolution | 0.1 °F | 0.1 psi | 0.1 %RH | 0.1 °F |
| Clamp opening diameter | .25 to 1.5 in. | |||
| Connection | 7/16" – UNF | |||
| Overload rel. | 870 psi | |||
| Battery life | 250 hrs | 150 hrs | 150 hrs | |
| Dimensions | 7.2 x 3.5 x 1.2 in. | 4.9 x 1.3 x 1.2 in | 8.6 x 1.2 x 1.0 in. 2.9 in probe shaft | |
| Measurable media | CFC, HFC, HCFC, N, H2O, CO2 | |||
| Measuring Units | °F, °C | bar, psi, MPa, kPa | °F, °C, %rF / %RH, °Ftd, °Ctd, wetbulb °F / °C | |
| General Specifications | ||||
| Bluetooth Range | up to 350 ft | |||
| Storage temperature | -4 to 140 °F | |||
| Operating temperature | -4 to 122 °F | |||
| Compatibility | Requires iOS 8.3 (or later) / Android 4.3 (or later) | |||
| Requires mobile device with Bluetooth 4.0 | ||||
| Battery type | 3 AAA Batteries | |||
| Warranty | 2 years | |||
Testo 510i Differential Pressure Smart Probe
| Measuring Range: | 0 to + 60 Inches of water column PSI (0 to 150 hPa) |
| Accuracy: | ±1 digit ± 0.02 IWC (0.05 hPa) (over the range 0 to 0.4 IWC or 0 to 1 hPa) ± 0.08 IWC + 1.5 % measured value or ± 0.2 hPa + 1.5 % measured value.) (over the range 0.4 to 60 IWC (1 to 150 hPa) |
| Resolution: | 0.01 IWC (0.01 hPa) |
| Operating Temperature: | -4 to 122°F (-20 to +50 °C) |
| Battery Type: | 3 AAA |
| Battery Life: | 150 hrs |
| Dimensions: | 5.8 x 1.4 x 0.9 inch (148 x 36 x 23 mm) |
| Warranty: | 2 years |
CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS
| Data Logging | Up to 1,000 samples |
| Sampling Rate | 1X/sec. for max of 16 mins., 40 secs. |
| Maximum Input Current | 1000A AC |
| Maximum Input Voltage | 750V AC (TRMS); 1000V DC |
| Wattage | 3W / 100W / 4000W / 10kW / 100kW / 750kW |
| AC Current | 60A / 600A / 1000A |
| Inrush Current | 60A / 600A / 1000A |
| Resistance | 600Ω / 6kΩ / 60kΩ / 600kΩ / 6MΩ / 60MΩ |
| Capacitance | 9.999nF / 99.99nF / 999.9nF / 9.999µF / 99.99µF / 999.9µF / 9.999mF / 99.99mF |
| Jaw Opening | 1.6" (42mm) |
| Max. Size (H x W x D) | 9.4" x 1.9" x 3.6" (238 x 50 x 92 mm) |
| Weight | 0.92 lb (420 g) |
Includes
- (1) Testo 0563 0009 Smart Probes AC / Refrigeration Capacity Test Kit
- (2) Testo 115i Pipe Clamp Thermometer Smart Probe - 2nd Gen
- (2) Testo 549i Refrigeration Pressure Smart Probe - 2nd Gen
- (2) Testo 605i Humidity Smart Probe - 2nd Gen
- (18) AAA Batteries
- (1) Testo HVAC Softcase
- (1) Certificate of Calibration
- (1) Testo 510i Differential Pressure Smart Probe
- (1) Testo 605i Humidity Smart Probe - 2nd Gen
- (1) CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS
- (2) A-303 Magnetic Static Pressure Tips
- (2) CPS 1/4" SAE Tee Valve Connectors
- (2) CPS 1/4" Brass Caps
Videos
Resources
Testo 0009 Smart Probes
Datasheet
Software / App
The Testo Smart Probes App combines the power of your smart phone/tablet with the accurate measurements of your Smart Probes. The operation and display of the instruments are communicated via Bluetooth to the App on your smart phone or tablet . The Smart Probes App uses the measurements to create custom reports (including added photos and comments). Information and reports can be saved as files and/or sent by e-mail. For Apple iOS and Android.
Download the Testo Smart Probes App for your Android or iOS devices
The measureQuick App supercharges a variety of BlueTooth smart tools with rich diagnostics, data logging and reporting capabilities. Now you can see intuitive visuals informing about each job, piece of equipment, or system all in one place!
Download the measureQuick App for your Android or iOS devices
App / Device Compatibility
- Requires iOS 8.3 or newer / Android 4.3 or newer
- Requires mobile device with Bluetooth 4.0