Description
Testo 0563 0009 Smart Probes AC & Refrigeration Capacity Test Kit-Long Range BlueTooth Probes
NEW! Bluetooth range of up to 350 feet
Works with MeasureQuick
The testo AC & Refrigeration test and load kit includes two testo 549i high-pressure measuring instruments, two testo 605i thermohygrometers and two testo 115i clamp thermometers for pressure, (air) temperature and humidity measurement. In conjunction with a smartphone or tablet, the kit is ideally suited to servicing and troubleshooting on air conditioning and refrigeration systems, as well as their installation. The testo 549i and testo 115i can be quickly and easily attached directly at the pressure connection or the temperature measuring point. It is now considerably easier to work at a longer distances, thanks to improved wireless connection to your smartphone or tablet.
The measuring values of both instruments are transmitted via Bluetooth to the testo Smart Probes App installed on your terminal device enabling convenient and flexible readout there. In addition, the App enables automatic calculation of evaporation and condensation temperatures as well as of heating/cooling capacity/output. All measurement data is viewable either as a diagram or a table. Finally, the measurement data report can be e-mailed directly as a pdf or Excel file.
Features:
- Measure high-side & low-side refrigerant pressure & temperatures (simultaneously) of AC/refrigeration systems
- Testo 549i now includes 45° angled hose connections
- Testo 605i now includes 90° foldable probe with built in attachment magnets
- NEW! Bluetooth range of up to 350 feet
- Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
- Calculate superheat and subcooling in the Smart Probe App
- Tough, accurate, and easy-to-use
- HVAC softcase holds the complete set of smart probes
- Operates with iOS or Android smart devices such as smart phones, tablets, etc.
Specs
| Testo 115i | Testo 549i | Testo 605i | ||
|---|---|---|---|---|
| Sensor type | NTC | Pressure | Humidity – Capacitive | NTC |
| Measuring range | -58 to 302 °F | -14 to 870 psi | 0 to 100 %RH | -4 to 140 °F |
| Accuracy ±1 digit |
±2.3 °F (-4 to 185 °F) | 0.5 % of final value | ±3.0 %RH (10 to 35 %RH) ±2.0 %RH (35 to 65 %RH) ±3.0 %RH (65 to 90 %RH) ±5 %RH (< 10 %RH or> 90 %RH) (at 77 °F) |
±1.4 °F (-4 to 32 °F) ±0.9 °F (32 to 140 °F) |
| Resolution | 0.1 °F | 0.1 psi | 0.1 %RH | 0.1 °F |
| Clamp opening diameter | .25 to 1.5 in. | |||
| Connection | 7/16" UNF | |||
| Overload rel. | 870 psi | |||
| Battery life | 250 hrs | 150 hrs | 150 hrs | |
| Dimensions | 7.2 x 3.5 x 1.2 in. | 4.9 x 1.3 x 1.2 in | 8.6 x 1.2 x 1.0 in. 2.9 in probe shaft | |
| Measurable media | CFC, HFC, HCFC, N, H2O, CO2 | |||
| Measuring Units | °F, °C | bar, psi, MPa, kPa | °F, °C, %rF / %RH, °Ftd, °Ctd, wetbulb °F / °C | |
| General Specifications | ||||
| Bluetooth Range | up to 350 ft | |||
| Storage temperature | -4 to 140 °F | |||
| Operating temperature | -4 to 122 °F | |||
| Compatibility | Requires iOS 8.3 (or later) / Android 4.3 (or later) | |||
| Requires mobile device with Bluetooth 4.0 | ||||
| Battery type | 3 AAA Batteries | |||
| Warranty | 2 years |
Includes
- (2) Testo 115i Pipe Clamp Thermometer Smart Probe - 2nd Gen
- (2) Testo 549i Refrigeration Pressure Smart Probe - 2nd Gen
- (2) Testo 605i Humidity Smart Probe - 2nd Gen
- (18) AAA Batteries
- (1) Testo HVAC Softcase
- (1) Certificate of Calibration
Videos
Testo Smart Probes AC & Refrigeration Datasheet
Software / App
The Testo Smart Probes App combines the power of your smart phone/tablet with the accurate measurements of your Smart Probes. The operation and display of the instruments are communicated via Bluetooth to the App on your smart phone or tablet . The Smart Probes App uses the measurements to create custom reports (including added photos and comments). Information and reports can be saved as files and/or sent by e-mail. For Apple iOS and Android.
Download the Testo Smart Probes App for your Android or iOS devices
The measureQuick App supercharges a variety of BlueTooth smart tools with rich diagnostics, data logging and reporting capabilities. Now you can see intuitive visuals informing about each job, piece of equipment, or system all in one place!
Download the measureQuick App for your Android or iOS devices
App / Device Compatibility
- Requires iOS 8.3 or newer / Android 4.3 or newer
- Requires mobile device with Bluetooth 4.0