UEi 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit

UEi KANE 522KIT Oil Burner & Boiler Install Kit with C161 Combustion Analyzer, Clamp Meter, Manometer, Leak Detector, Thermometer, and Smoke Test Kit

Featuring the C161, DL579, EM201B, CD100A, and PDT655.

This Kit provides the recommended test instruments required by Oil Burner & Boiler start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation.The 522KIT is packed in a UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip.

This Kits helps confirm:

• Manufacturer requirements to maintain warranty
• Combustion analysis for fuel efficiency
• Heat exchanger integrity
• Smoke level in the flue gases
• CFM via external static pressure test
• Gas flow pressure
• System is safe from gas leaks
• Proper high voltage to power supply and ground
• Low voltage meets wiring diagram requirements

---

UEI C161 Residential Combustion Analyzer

Don't miss out on the great benefits of UEi Service+.
Register your combustion analyzer with UEi and get notified when its time to recertify.

Backed by UEi Service+ to allow up to 10 years' warranty, same day recertification and a reduced cost of ownership. The C161 Residential Combustion Analyzer is easy to use with a rugged design, multiple sensor protections and altitude compensation. Prints to optional printer. Essential information for the installation and maintenance of furnaces and boilers.

C161 has two types of sensor protection; a NOx filtered CO sensor and Low Flow Detection. It also has sensor technology that reduces the cost of ownership, a Heat Exchanger test to check the exchanger integrity, and differential temperature. The C161 comes with high altitude compensation to maintain accurate readings at any altitude, auto-purge shut off, and 8 Pre-programmed fuels including Natural Gas and Propane.

The C161 has a 6-Line display to view readings on one screen, which is a favorite among technicians. The DMM Style dial makes it easy to select the test needed. It also features a water trap to protect the sensor with a check light to remind to look for condensate built-up, a magnetic boot for hands-free operations, and an IR printer port to print to an optional printer sold separately, making it easy to document test results for later analysis.

Product Features & Functions:

• Up to 6 Year warranty with annual recertification
• 2 Types of Sensor Protection
• NOx Filtered
• K-Type Temperature Inputs
• Low Flow Detection
• Temp differential
• 6 line backlit display
• 8 Preprogrammed Fuels
• 30 second start time
• High altitude compensation
• 30 Memory Positions
• Protective Water Trap
• Automatic fresh air purge
• Magnetic mount
• IR printer link (Printer not included)

---

UEi DL579 True RMS Clamp Meter with Temperature and Capacitance

True-RMS Dual Display 600A HVAC/R Clamp Meter w/ Temperature & Capacitance

Application
Measure capacitance, voltage, circuit continuity, resistance, temperature via K-Type thermocouples and diode malfunctions. Check system boards and live wires.

Functions:
TRMS:	Yes
AC Volts:	750VAC
DC Volts:	1000VDC
AC current (amps):	600A AC
AC micro current (amps):	2000µA
DC micro current (amps)	2000µA
DC micro volts:	600mV
AC micro volts:	600mV
Resistance (Ohms):	60MΩ
Capacitance (Farads):	6000µF
Frequency (Hertz):	99.99kHz
Duty cycle:	1.0 to 99.0%
Temperature:	-328° to 2462°F
Continuity:	Yes
Diode:	Yes
NCV Detection:	Yes
LRA Inrush:	Yes
Low Z:	Yes
Features:
Hold:	Yes
Min/Max:	Yes
Ranging:	Auto/Manual
Auto power off:	Yes
Display count:	6000
Low battery warning:	Yes
Backlight:	Yes
Dual display:	Yes
Temperature Inputs:	K-Type
Protective boot or overmolding:	Yes
Magnetic mount:	Optional
Warranty:	1 Year limited
Audible and visual alerts:	Yes
K-type input:	Yes
Digital:	Yes

---

UEi CD100A Combustible Gas Leak Detector

Find Combustible Gas Leaks Quickly!

---

UEi EM201B Dual Input Differential Manometer

A Digital, Time Saving Alternative to U-Tube Pressure Measurement.

---

UEi PDT655 Differential Folding Pocket Thermometer with Large Easy-to-Read Display

Differential Folding Pocket Thermometer w/ Large Easy-to-Read Display

Features:

• Range: -58° to 572°F (-50° to 300°C)
• Differential Temperature
• Auto Off
• Backlight
• Magnetic Mount
• Folding Probe

---

UEI Smoke Pump Test Kit

• High impact barrel
• Stainless steel hardware
• Fits all types of smoke paper
• 1 Year limited warranty