TruTech Tools Fieldpiece Professional Job Link® Smart Probe Kit for measureQuick with Electrical and Pressure

TruTech Tools Fieldpiece Professional Job Link® Smart Probe Kit for measureQuick with Electrical and Pressure

Incorporating Fieldpiece Products. Works with measureQuick!

All JL3RH's can be upgraded through a firmware update to handle extreme duct temps from -40°F to 250°F.
Just open the Fieldpiece Job Link® App and you will be prompted to update your probes.

Take a full system snapshot quickly and easily with the TTT Exclusive Professional Job Link® Kit for measureQuick. This kit consists of 2 pressure probes, 2-3 pipe clamps, and 3 psychrometers in a quick access padded case. All measurements can be sent up to 1000' away directly to your mobile device with the Job Link® app. Each tool is designed for agility and speed. The pressure probes fit into tight spaces. The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations. The psychrometers' flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link® smart probes!

Take it the next step further with the CPS VOLT-100 Electrical Meter to get a full read on the system. It also comes with the Fieldpiece JL3KM2 Dual Manometer Probes for measuring static pressure, pressure drop across filters or coils, and gas flow when paired with the included pitot tube.

Wireless range of 1000' plus

• Directly connects to mobile device with measureQuick or the Job Link® System App. iOS and Android compatible.
• Fast accurate temps with new Rapid Rail technology
• Pressures auto calibrate at any elevation
• Configurable psychrometers with flexible probe and sliding magnet

Powerful Wireless Signal Strength

• Up to 1000' wireless signal
• Powerful enough to go through most walk-in coolers and freezers
• Directly transmits to your mobile device

Rapid Rail Sensor Advantages

• Stabilizes in under 5 seconds
• Beeper and LED indicate accurate connection
• The Rapid Rail sensor uses pipe to complete circuit so ambient conditions don't affect the measurement
• Narrow jaw connects in tight spaces and on irregular pipe shapes

Reliable Pressures Regardless of Location

• 45° angled fitting easily connects in tight spaces
• Pressure sensors are accurate at any elevation
• Calibrates automatically when powered on

Configurable Psychrometric Testing

• Probes measure return and supply for grilles and registers
• Place at multiple locations based on system requirements
• Long flexible probe with sliding magnet for easy placement on system
• Narrow tip fits in 3/8'' holes or larger
• Real time enthalpy and delivered BTUs

---

Fieldpiece JL3KM2 Job Link® Dual Manometer Kit

You know taking pressures from exact locations results in more precise diagnostics, so why be limited by hose length? The revolutionary new Dual Port Manometers from Fieldpiece aren't tethered by hoses, so you get readings from optimal locations on every system, every time.

Short hose length keeps things neat, and independent sensors allow for direct placement on test ports. Measure between zones without snaking a hose past the door where it can be pinched. Dial in gas pressure of a furnace. Optimize total external static pressure of equipment. Pinpoint duct leaks and restrictions. Increase comfort and do more.

Key Features & Benefits

• Reliable pressure regardless of location
• Measure real-time pressure drops
• Find inlet and outlet gas pressures
• Switchable P1 - P2 indicator
• Job Link® System App compatible
• Easy zero to atmosphere
• 1000' long-range wireless
• Rugged metal tips
• All-in-one static, gas, and draft pressure
• Accurate and stable measurements
• Measure between zones without snaking a hose under the door
• Strong rotating magnet
• Untethered usage
• Individual pressure readouts give you P1, P2, and pressure differential in real-time
• All accessories for static and gas applications included
• Document system health in Job Link® App reporting

View static pressures or gas pressures from the new Fieldpiece manometer probes directly on the Job Link® App -- up to 1000' away! Unlike traditional dual port manometers, the JL3MN probes work independently so you don't have to bother with long hoses. This modular freedom also gives you real-time differential pressures from across the job site. Place probes in precise locations regardless of system set up. From gas pressures of residential furnaces to the total external static pressure on commercial air handlers, you now have the versatility you've always needed.

---

CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS

The CPS VOLT-100 is a portable, professional multifunction instrument with an LCD display for obtaining electrical measurements. It can be used as a conventional clamp meter or may be paired to Apple & Android smartphones & tablets via Bluetooth for additional functionality.

Key Features & Benefits

• Use with or without the CPS Link app
• Connects to Apple and Android smartphones & tablets via Bluetooth
• Power factoring to determine true power consumption
• Data logging of electrical readings
• Utility data feed calculates actual cost/hour of appliances
• CAT III 1,000 V rating
• True RMS measurements
• Non-contact voltage tester
• Maximum Voltage: 750 V AC; 1000 V DC
• Auto range and manual measuring
• Measuring range overload protection
• Display auto-off
• Display backlight
• Automatic polarity indication
• Max/Min and relative measuring function

Measures

• Inrush current
• AC current
• Resistance
• AC/DC voltage
• Phase angle
• Harmonics
• Frequency
• Capacitance
• Duty cycle
• Diode connection

---