Description
Fieldpiece RXA3 Heated Diode Sensor Tip
One sensor for all specified refrigerants, tracer gas, and heating gases
Replacement part for the Fieldpiece DRX3 Refrigerant and Combustible Gas Leak Detector. Depending on gas exposure, the RXA3 sensor should be replaced after approximately 300 hours of use.
Key Features & Benefits
- Detects A3, A2L, A1 refrigerants including HC, HFC, HCFC, CFC, HFO, H2/N2 (Tracer Gas) and blend refrigerants
- Also detects Natural gas, Propane, Butane, and Methane combustible gases
- Accurate, field-replaceable, heated diode sensor
Sensor Installation (See product image 2)
- Ensure your DRX3 is powered off
- Align the new sensor tip (RXA3) notch with the module notch, and push into place at the end of the module. DO NOT TWIST OR BEND PINS. The RXA3 sensor tip works for all specified refrigerants, tracer gas, and heating gases
- For a new sensor, enter factory mode by holding POWER, ZERO, and SENSITIVITY buttons together > 5 seconds
- Press ZERO until "2. Reset Sensor Life" appears. Press and hold ZERO and SENSITIVITY to reset sensor hours
- Press and hold POWER to power off
Specs
| Fieldpiece RXA3 Sensor Specs | |
|---|---|
| Sensor Type | Heated diode |
| Sensor Life | 300 hours typical |
| Sensitivity Levels | High, Medium, Low (selectable) |
| Maximum Sensitivity | 1g/yr (0.03 oz/yr), stationary; 3g/yr (0.1 oz/yr), in motion |
| Detection Feedback | Flashing LED, LCD bar graph and digits, audible beep, Job Link® app |
| Refrigerants | HC, HFC, HCFC, CFC, HFO, H2/N2 (Tracer Gas: 5% Hydrogen, 95% Nitrogen), and blends |
| Heating Gases | Natural Gas, Propane, Butane, Methane |
| For Use With | A3 (R-290, R-600a, R-600, R-50, R-1270), A2L (Including R-32, R-454B, R-1234yf), and A1 refrigerants |
| Not For Use With | R-702, R-717, R-744 |
Includes
- (1) Fieldpiece RXA3 Heated Diode Sensor Tip