Description

Description

Retrotec Build Your Own BPI Weatherization Kit with US5100X Blower Door

Choose options and build your own BPI kit with Retrotec Blower Door

The Retrotec Build Your Own BPI Kit from TruTech Tools is designed specifically for professionals in the BPI Weatherization community who need flexibility, reliability, and precision on the job. This customizable kit lets you hand-pick the tools you trust — including the Retrotec Blower Door, DucTester, and important accessories such as a combustion analyzer and thermal imager — to match your specific testing and diagnostic needs.

Whether you're conducting blower door tests, duct leakage testing, or whole-house energy assessments, this kit gives you control to configure the right equipment while ensuring full BPI compliance and field-ready performance.

Perfect for:

BPI Building Analysts
Energy Auditors
Weatherization professionals
Contractors working on energy efficiency programs

Why choose this kit?

Built around Retrotec's proven and trusted equipment
Easily configure for your specific certification or project requirements
Backed by TruTech Tools' industry-leading support and expertise

Streamline your field setup with a kit built your way — without paying for gear you don't need. Create a BPI kit that works as hard as you do.

Specs

Fan Specs
Fan Model #:	5000
	Flow Into:	CFM	litres/sec	m3/h
Maximum Flow, per fan (60 Hz)	Free Air	6,400	3,020	10,874
Maximum Flow, per fan (60 Hz)	50 Pa	5,700	2,690	9,684
Reduce values by 15% for 50Hz fan	75 Pa	5,400	2,549	9,175
Minimum Flow: -on optional Range B29		8.1	3.8	14
Dimensions:	22" (55.9 cm) inlet diameter, 9.75" (24.8 cm) long, 25" (63.5 cm) height
Weight:	33.5 lb (15.2 kg) or 35.2 lb (16.0 kg) with Ring A & Plated B8 installed
Flow Accuracy:	+/-5%
Power:	120V@60hz/11A or 240V@50hz/4.9A or 110V@50Hz/ 8.9A
Recommended Fan Calibration Interval:	5 years
Gauge and Frame Specs
Digital Gauge Model:	DM32X
Door Panel and Frame Model:	AL250
Type of Panel:	SmartCloth Panel & Frame - Single 1000/3000/5000/6000 Fan
Type of Frame:	Regular Sized Red Anodized Frame
Collapsed:	27-1/8" X 53-3/8" (68.9cm X 135.6cm)
Expanded:	53" - 97" (135 - 246 cm)
Frame Thickness:	1.75" (5.3 cm)
Weight (approx):	16 lbs (7.3 kg)

* The max flow of the fan will vary depending on the following factors:
voltage, frequency, barometric pressure, back pressure, blade pitch, air temperature, bearing tightness, inlet air turbulence

* 5000/6000 series blower doors DO NOT work with the DM-2 digital gauge

Includes

By default this kit includes a Retrotec Blower Door as shown below. Add more products using the options near the 'Add to Cart' button to create your own custom kit.