UEi 511KIT Heat Pump Install Kit with Clamp Meter, Leak Detector, Manometer, and Smart Probes

UEi 511KIT Heat Pump Install Kit with Clamp Meter, Leak Detector, Manometer, and Smart Probes

Featuring the DL579, RLD15B, HUB8, and EM201B.

This Kit provides the recommended test instruments required by heat pump start up manuals for proper installation and maintenance. Most equipment warranties require initial install readings to be documented upon installation. The 511KIT is packed in a UEi Tool Backpack. Built rugged, waterproof base, two compartments with inner pocket options and includes D-clip.

This Kits helps confirm:

• Manufacturer requirements to maintain warranty
• CFM via external static pressure test
• System is free from refrigerant leaks
• Proper high voltage to power supply and ground
• Low voltage meets wiring diagram requirements
• Evacuation Suction & Liquid valves
• Temperatures of Suction & Liquid lines
• Superheat and Subcool values for adjustments

---

UEi DL579 True RMS Clamp Meter with Temperature and Capacitance

True-RMS Dual Display 600A HVAC/R Clamp Meter w/ Temperature & Capacitance

Application
Measure capacitance, voltage, circuit continuity, resistance, temperature via K-Type thermocouples and diode malfunctions. Check system boards and live wires.

Functions:
TRMS:	Yes
AC Volts:	750VAC
DC Volts:	1000VDC
AC current (amps):	600A AC
AC micro current (amps):	2000µA
DC micro current (amps)	2000µA
DC micro volts:	600mV
AC micro volts:	600mV
Resistance (Ohms):	60MΩ
Capacitance (Farads):	6000µF
Frequency (Hertz):	99.99kHz
Duty cycle:	1.0 to 99.0%
Temperature:	-328° to 2462°F
Continuity:	Yes
Diode:	Yes
NCV Detection:	Yes
LRA Inrush:	Yes
Low Z:	Yes
Features:
Hold:	Yes
Min/Max:	Yes
Ranging:	Auto/Manual
Auto power off:	Yes
Display count:	6000
Low battery warning:	Yes
Backlight:	Yes
Dual display:	Yes
Temperature Inputs:	K-Type
Protective boot or overmolding:	Yes
Magnetic mount:	Optional
Warranty:	1 Year limited
Audible and visual alerts:	Yes
K-type input:	Yes
Digital:	Yes

---

UEi HUB8 Smart Refrigeration Probes Deluxe Kit with Vacuum Gauge

View All Indoor and Outdoor AC/R System Parameters from One Location

The HUB8 Smart Refrigeration Probes Deluxe Kit is the most complete and convenient wireless refrigeration probe kit available today. The HUB8 makes it easier for you to service and charge air-conditioning and refrigeration systems. The addition of the wireless Vacuum Gauge and Outdoor Thermometer probe integrates real-time Target Superheat, Evacuation and Rise Test calculations into the App. This provides a more accurate, efficiency and cost-effective charge on the system allowing all your vacuum, refrigeration and air parameters to be viewed from one location.

Features:

• Wireless vacuum gauge probe
• Real time target superheat calculation
• Pressure probes w/ 180° articulation
• Refrigerant pass through port
• Wireless pipe clamps
• Dual mode vacuum screen for evacuation & rise tests
• Temperature split and psychrometric calculations
• Easy drag-and-drop probe connections
• Wireless distance of 350ft pending environment

• Wireless Vacuum Gauge Probe
• Range 0-20,000 Microns
• 1-micron Resolution, ±5% reading ±5 microns accuracy
• Oil contamination and sensor failure detection
• Instant warm-up and response time
• 1/4" Nickel-plated flare fitting
• 45° coupler included
• Wireless Pressure Probes
• Pass through refrigerant port for easily adding or recovering refrigerant from the system without disconnecting probes
• 180° rotation for easy use in cramped spaces
• Range 0 to 725 psig, resolution 0.1 psi.
• Accuracy 0.5%FS (@25±3°C), total 1%FS
• Wireless Pipe Clamps
• Sensor is thermally isolated from ambient temperatures
• High accuracy thermistor provides better results than thermocouples and doesn't require field calibration
• Slim design fits into tight spaces
• Range 32° to 176°F (0° to 80°C), resolution 0.1°F.
• Response time < 30 sec. Accuracy ±0.6°F (±0.3°C).
• Wireless Hygrometer Probes
• Slimmest 1/4" hygrometer probe means smaller drill holes
• Magnetic mount and locking probe holds WHP1 to plenum for hands-free operation
• Temp range: 32° to 140°F (0° to 60°C), Accuracy: ±0.5°F (±0.3°C)
• Relative Humidity: 0 to 100% (0.1% resolution, ±3% accuracy from 20 to 80% ±5% otherwise)
• Wireless Outdoor Temperature Probe
• Temperature range 32° - 180°F (0° - 82°C)
• Magnetic hanger allows for temperature measurement in direct air stream
• Compact lightweight design

---

UEi EM201B Dual Input Differential Manometer

A Digital, Time Saving Alternative to U-Tube Pressure Measurement.

---

UEI RLD15B Refrigerant Leak Detector

Detects industry standard refrigerants including, but not limited to: HFC, HCFC, CFC (R-134A, R-410A sensitivity = 0.05 oz/yr)