Description
Veto Pro Pac MB5B Extra Large Customizable Tool and Meter Backpack Bag
V-SWAP compatible with optional Backpack Straps
The Veto Pro Pac MB5B Tool Bag is an extra large and highly-configurable front accessed tool and meter bag. Once the bag is loaded out, it can be worn over both shoulders using the included backpack straps, over a single shoulder using the optional padded shoulder strap (sold separately), or at your side with over-molded gripped handle. The bag features an additional 8 pockets on the front flap as well as a padded tablet computer pocket on the back. The bag has been configured for storing a variety of hand tools inside the bag while separately storing 1-2 clamp meters in the 2 padded side mounted zippered pockets. Includes the following V-SWAP Pannels: Large Side Pockets, Front Tool Pannel, Rear Tool Pannel. More V-SWAP Pannels are available (sold sepparately).
Features
- 21 exterior tool pockets
- Rear padded tablet computer pocket
- Detachable / optional backpack straps
- 2 padded side-mounted meter or tool pockets with repositionable interior pockets
- V-SWAP removable component system - choose from several included or optional panels
- Removable storage box & adjustable height shelf for accommodating a Multifunction Tester
- Pair of 8 in / 20 cm magnetic parts bags for leads and fittings
- "Hang-up" hook - accessible while open and closed
- Over-molded rubber grip
- 8" electrical tape strap
- Polypropylene plastic base for moisture and abrasion protection
- Warranty: 5 Years
Specs
| Max Payload | 45 lbs |
| Internal Volume | 840 cubic in / 14L |
| Weight (empty) | 9 lbs |
| Height | 15 in |
| Depth | 10 in |
| Width | 15 in |
| Waranty | 5 year limited |
Includes
- (1) Veto Pro Pac MB5B Extra Large Customizable Tool and Meter Backpack Bag
Videos
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!