Description
Veto Pro Pac SB-XXL Hybrid Tool and Meter Bag with V-SWAP Panel System
Hybrid design for organized tool and meter storage
The SB-XXL is a medium, hybrid tool bag with a large dedicated front tool section accessible via a flap that opens from the top down to protect your tools from the elements. The flap features a zippered 2-way access pocket that can be reached from either the outside or inside of the bag. This bag has 2 external side pockets ideal for storing a meter, smart probes or additional tools and has a rear enclosed, protected tester section for sensitive equipment. It also features a shoulder strap and the V-SWAP™ panel system and includes the Rear Meter Panel. Additional panels are sold separately.
Key Features & Benefits
- Dedicated closed-top tool storage section for quick, easy access
- Top-down flap access with zippered two-way pocket accessible from inside or outside
- Closed-top meter/tester storage section with V-SWAP™ panel
- Waterproof polypropylene plastic base for moisture and abrasion protection
- V-SWAP™ removable tool pocket panel system, meter panel included
- 41 total interior and exterior pockets
- Two external side meter pockets
- Tarpaulin-covered rear pocket for added weather and abrasion protection
- Detachable over-molded elastomeric grip handle
- Shoulder strap
- “Hang-up” hook
- Tape loop and stainless steel tape clip
- YKK® zippers
- 5-Year Limited Warranty
Specs
| Max Payload | 30 lbs (13.5 kg) |
| Weight (empty) | 6.8 lbs (3.1 kg) |
| Height | 15 in (38 cm) |
| Depth | 9.5 in (24.3) |
| Width | 15 in (38 cm) |
| Waranty | 5 year limited |
Includes
- (1) Veto Pro Pac SB-XXL Hybrid Tool and Meter Bag
- (1) V-SWAP™ Meter Panel
Resources
Veto Pro Pac SB-XXL Hybrid Tool Bag Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed... proceed with caution!