Description
Veto Pro Pac SC45 BLACKOUT Multi-Functional Tool and Phone Pouch with Removable V-SWAP Panel
A versatile tool, phone, and EDC pouch built for quick-access storage on the job
The SC45 BLAKOUT is an all-black small, semi-rigid, multi-functional pouch designed to attach to a waist belt or the side of a tool bag using its wire belt clip or carabiner. This pouch combines a phone holster, Leatherman pouch, tool pouch, and EDC pouch into one. The front features an all-black removable tool pouch with two main pockets for a screwdriver or pliers, a pair of thru-pockets, pencil pockets, a stainless-steel tape measure clip, and an electrical tape strap. Inside, there is a padded wall with an elastic neoprene pocket to accommodate any size phone, along with an elastic band for storing a notepad. The pouch also includes a removable 3-pocket V-SWAP™ panel for storing a pocketknife, penlight, and pen or pencil.
Key Features & Benefits
- Blackout color scheme
- Semi-rigid exterior with a moisture-resistant back
- Removable tool pouch featuring 6 pockets, a stainless steel tape measure clip, 2 D-rings, and a magnetic flap for securing to a waist belt or trouser pocket
- Front external sleeve pocket designed to hold the removable tool pouch and sized to fit a smartphone
- Includes a double-gated carabiner for hanging the case while open or closed
- Wire-formed and nylon plastic belt clip
- V-SWAP™ removable tool pocket panel with 3 internal pockets for a pocket knife, penlight, pen, or pencil
- Padded internal smartphone pocket lined with anti-scratch material
- Internal elastic strap for securing a small notepad
- YKK® zippers
- 5-Year Limited Warranty
Specs
| Veto SC45 BLACKOUT Specs | |
|---|---|
| Max Payload | 10 lbs (4.5 kg) |
| Internal Volume | 45 in3 (0.7 L) |
| Weight (empty) | 1.25 lbs (0.6 kg) |
| Height | 8.5 in (21.6 cm) |
| Depth | 4.5 in (11.5 cm) |
| Width | 5.5 in (14 cm) |
| Warranty | 5 year limited |
Includes
- (1) Veto Pro Pac SC45 BLACKOUT Tool and Phone Pouch
- (1) V-SWAP™ 3 Pocket Panel
Resources
Veto Pro Pac SC45 Tool Pouch Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed... proceed with caution!