Description
Veto Pro Pac TECH-MCTP INFRARED Extra Large Compact Tool and Meter Bag
Compact service bag with V-SWAP™ panels, side pockets, neoprene pockets and rugged construction
The TECH-MCTP INFRARED is a compact service and repair tool bag in Veto Pro Pac's black and red INFRARED color scheme. It offers the same construction and storage capacity as the TECH-MCT BLACKOUT with added side pockets for separate meter or tool storage. The bag features external daisy chains for attaching pouches and accessories, as well as Velcro loops for attaching morale patches. The TECH-MCTP INFRARED edition comes with the V-SWAP™ Tool Panel and the V-SWAP™ Meter Panel, allowing you to customize your internal storage layout for tools and meters on the jobsite.
Key Features & Benefits
- Compact service tool bag with INFRARED color scheme
- Includes V-SWAP™ Tool Panel and V-SWAP™ Meter Panel
- External daisy chain for attaching pouches and accessories
- External Velcro loop for attaching morale patches
- 2 external side pockets for separate meter or tool storage
- Neoprene pockets for meters and testers
- 55 interior and exterior pockets of varying sizes
- Holds over 50 hand tools
- Polypropylene plastic base for moisture and abrasion protection
- Articulating/fold-flat handle with over-molded ergonomic grip
- Extra wide padded shoulder strap for comfort
- YKK® zippers
- 5-year limited warranty
Specs
| TECH-MCTP Tool Bag Specs | |
|---|---|
| Height (H) | 14" (35.6 cm) |
| Width (W) | 16" (40.6 cm) |
| Depth (D) | 8.5" (21.6 cm) |
| Weight (empty) | 8.6 lb (3.9 kg) |
| Internal Volume | 930 in³ (15.3 L) |
| Max Payload | 40 lb (18 kg) |
Includes
- (1) Veto Pro Pac TECH-MCTP INFRARED Compact Service Tool Bag
- (1) V-SWAP™ Tool Panel
- (1) V-SWAP™ Meter Panel
Resources
Veto Pro Pac MCTP Tool Bag Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!