Description
Veto Pro Pac TECH PAC MC SPECIAL OPS Compact Backpack Tool Bag with PB5 Small Part Bags
Includes 2 Small Part Bags for increased storage
The TECH PAC MC SPECIAL OPS is a compact back pack, designed for Techs that need to "hands-free" carry a minimum amount of tools and test meters for service calls and minor installs. Combining the tactical look of Blackout bags with the practicality of bold Hi-Viz accents, the TECH PAC MC SPECIAL OPS also includes black reflective tape for enhanced visibility. The 2 included PB5 Parts Bags are useful inside and out of the backpack for keeping small tools & gear organized.
Features
- 39 Interior and Exterior pockets
- Subtle 'Black Reflective' elements & bold Hi-Viz Yellow accents
- 2 PB5 HI-VIZ Parts bags included
- Neoprene meter pockets
- Interior magnetic screw catcher
- 2 storage bays - 4 storage platforms
- Padded EVA foam back pad
- Waterproof Polypropylene plastic base for moisture and abrasion protection
- Quick release metal hasp, allows easy access to rear storage bay & positive connection to bag body
- 5 Year Manufacturer Defect Warranty
Specs
| Max Payload | 35 lbs |
| Weight (empty) | 8 lbs |
| Height | 17 in |
| Depth | 9 in |
| Width | 12 in |
| Waranty | 5 year limited |
Includes
- (1) Veto Pro Pac TECH PAC MC SPECIAL OPS Compact Backpack Tool Bag
- (2) PB5 Small Part Bags
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!