Description
Veto Pro Pac TP-LDP Large Service Technician Tool Pouch with Side Mounted Padded Meter Pockets
Compact, zippered service tech tool pouch
The TP-LDP is a one-sided, closeable, large service technician tool pouch designed with integrated, side-mounted, padded meter pockets. Each zippered meter pocket securely fits meters up to 8" (203 mm) x 3.5" (90 mm) x 2" (50 mm). The TP-LDP is ideal for technicians who need a compact tool storage bag with dedicated compartments for test equipment. Features include an injection-molded base, rear tablet pocket, "hang-up" hook, detachable padded shoulder strap, and over-molded carrying handle.
Key Features & Benefits
- 42 Total Exterior and Interior pockets
- 3 Metal tape clip holders
- Hang-up hook
- Includes rear tablet pocket: 8" H x 6" W x 1" D
- 2 padded meter pockets: 8" H x 4" W x 1.5" D
- Detachable over-molded elastomeric grip
- YKK® zippers
- Waterproof Polypropylene plastic base for moisture and abrasion protection
- Detachable padded shoulder strap
- 5-year limited warranty
Specs
| Internal Volume | 520 in3 / 8.5 L |
| Max Payload | 25 lbs / 11.5 kg |
| Weight (empty) | 4.4 lbs / 2 kg |
| Height | 12.5 in / 31.8 cm |
| Width | 14 in / 35.5 cm |
| Warranty | 5 year limited |
Includes
- (1)Veto Pro Pac TP-LDP Large Service Technician Tool Pouch with Side Mounted Padded Meter Pockets
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!