Description
Veto Pro Pac TEC PAC EVO Large Service Tool Backpack with 2 Modular Docks
Secure, modular storage customization with the EVO System
The TECH PAC EVO is a large tool backpack and part of Veto Pro Pac's new modular evo system™. It includes two evo system™ docks for securely attaching pouches with the evo system™ clip or other items with belt clips such as pouches, tape measures & pocket levels, or included electrical tape storing strap. The bag also features two strips of molded vertical MOLLE for additional clip attachment points, a rugged thermoformed front-access pocket, an exterior manifold gauge and hose storage pocket, a trolley handle pass-through, and premium removable backpack straps with extra padding and reinforced materials for enhanced durability and comfort.
The TECH PAC EVO also features Veto Pro Pac-s proprietary V-SWAP™ system of interchangeable panels and comes with the Tool Panel and Meter Pocket Panel. Additional panels are sold separately, enabling alternative configurations for tool, gear, or job-specific storage solutions.
Key Features & Benefits
- 2 evo system™ docks for attaching pouches with the evo system™ clip and all Veto Pro Pac belt clips as well as attaching a tape measure, a pocket level, or attaching an electrical tape strap
- 2 strips of molded vertical MOLLE for additional clip attachment points
- Rugged, thermoformed front access pocket
- Premium removable backpack straps with extra padding and enhanced materials for increased durability and load capacity
- Exterior manifold gauge & hose storage pocket
- "Hang-up" hook – accessible while open and closed
- V-SWAP™ removable tool pocket panel system
- Includes tool & meter panels; alternate V-SWAP™ panels available and sold separately
- Interior magnetic screw catcher
- Thermoformed cushioned EVA back pad
- Trolley handle pass-through
- Impact and water-resistant Polypropylene plastic base
- Quick release metal hasp supports load & allows easy access to rear storage bay
- 5-Year Limited Warranty
Specs
| TECH PAC EVO Backpack Specs | |
|---|---|
| Height (H) | 19" (48.3 cm) |
| Width (W) | 15.5" (39.3 cm) |
| Depth (D) | 11" (28 cm) |
| Weight (empty) | 13.9 lb (6.3 kg) |
| Internal Volume | 1,450 in³ (23.8 L) |
| Max Payload | 50 lb (22.5 kg) |
Includes
- (1) Veto Pro Pac TEC PAC EVO Large Service Tool Backpack
- (1) V-SWAP™ Tool Panel
- (1) V-SWAP™ Meter Panel
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!