Description
Veto Pro Pac TP-XXL EVO Extra Large Tool and Meter Pouch with 2 Modular Docks
Secure, modular storage customization with the EVO System
The TP-XXL EVO is a closable, extra-large tool pouch and part of Veto Pro Pac's new modular evo system™. It includes two evo system™ docks for securely attaching pouches with the evo system™ clip or other items with belt clips, such as tape measures, pocket levels, or the included electrical tape strap. The bag also has two strips of molded vertical MOLLE for additional clip attachment points. In addition to the included detachable 50" padded shoulder strap, this bag also features an ergonomic EVA-padded tablet pocket and attachment points for removable backpack straps or a sling strap (both sold separately), allowing the bag to be customized for different carrying options.
The TP-XXL EVO incorporates Veto Pro Pac's proprietary V-SWAP™ system of interchangeable panels, and comes with the V-SWAP Front Panel, V-SWAP Tool Panel, and the V-SWAP 2-Bit & 4-Bit Pocket Panels. Additional panels are available and sold separately.
Key Features & Benefits
- 2 evo system™ docks for attaching pouches with the evo system™ clip and all Veto Pro Pac belt clips as well as attaching a tape measure, a pocket level, or attaching an electrical tape strap
- 2 strips of molded vertical MOLLE for additional clip attachment points
- Attachment points for removable backpack straps and a removable sling strap (both sold separately)
- V-SWAP™ removable tool pocket panel system
- Includes rear tablet pocket
- "Hang-up" hook – accessible while open and closed
- Over-molded rubber grip
- Detachable 50" padded shoulder strap
- Impact and water-resistant polypropylene plastic base
- Tablet pocket dimensions: 11"H × 9"W × 1"D
- 5-Year Limited Warranty
Specs
| TP-XXL EVO Tool Bag Specs | |
|---|---|
| Height (H) | 15" (38 cm) |
| Width (W) | 11.5" (29.3 cm) |
| Depth (D) | 9" (22.8 cm) |
| Weight (empty) | 6.5 lb (2.9 kg) |
| Internal Volume | 570 in³ (9.3 L) |
| Max Payload | 30 lb (13.5 kg) |
Includes
- (1) Veto Pro Pac TP-XXL EVO Extra Large Tool and Meter Pouch
- (1) V-SWAP™ Tool Panel
- (1) V-SWAP™ Front Panel
- (1) V-SWAP™ 2-Bit Pocket Panel
- (1) V-SWAP™ 4-Bit Pocket Panel
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!