Description
Veto Pro Pac MP3 EVO Large Tool Pouch with Modular Clip
Secure, modular storage customization with the EVO System
Part of Veto Pro Pac's new modular evo system™, the MP3 EVO is a larger, medium-sized tool pouch. It utilizes the evo system™ clip for attaching the pouch to a larger bag with an evo system™ dock, a belt, trouser pocket, or magnetically mount to surfaces inside a work van or equipment requiring service. Ideal for a minimum amount of electrical or networking tools, the MP3 EVO features 8 main pockets sized for linesman's, needle nose or snips or drivers. A pair of thru-pockets on each side accommodate long shank or handled tools and 4 pen-sized pockets complete the sides of the pouch. The MP3 EVO is topped off with a low-profile carrying handle for easy transport, flush mounted stainless-steel clip providing a durable connection point for hanging tools.
Key Features & Benefits
- Utilizes the EVO SYSTEM™ clip for attaching the pouch to a larger bag with an EVO SYSTEM™ dock, a tool or waist belt, trouser pocket, or magnetically mounting to surfaces inside a work van or equipment requiring service
- Low-profile carrying handle for easy transport
- 8 vertical pockets
- 2 through pockets for long-shank tools
- Electrical tape strap
- 2 D-rings
- Stainless steel tape clip
- Leather and synthetic fiber construction
- 5-year limited warranty
Specs
| MP3 EVO Tool Pouch Specs | |
|---|---|
| Height (H) | 8.5" (21.5 cm) |
| Width (W) | 7" (17.8 cm) |
| Depth (D) | 5" (12.8 cm) |
| Weight (empty) | 1.1 lb (0.5 kg) |
| Max Payload | 8 lb (3.5 kg) 5 lb (2.5 kg) when magnetically mounted |
Includes
- (1) Veto Pro Pac MP3 EVO Large Modular Tool Pouch
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!