Description
Veto Pro Pac MB-S EVO Small Meter Bag with Modular Clip
Secure, modular storage customization with the EVO System
The MB-S EVO is a small, compact meter bag designed to store a multimeter. It uses the evo system™ clip for attaching the pouch to a larger bag with an evo system™ dock, a belt, trouser pocket, or for magnetic mounting to surfaces inside a work van or equipment requiring service. The bag features detachable Velcro gussets that allow it to open 180°, as well as two repositionable or removable elastic straps to secure the meter for unobstructed use while the pouch is open. Other features include an internal elastic strap for leads, five internal and external pockets for extra storage, external MOLLE for attaching items with a belt clip, and a low-profile carrying handle. The MB-M EVO can accommodate multimeter dimensions up to 8-1/2" x 4-1/4" x 2-1/4".
Key Features & Benefits
- Utilizes the EVO SYSTEM™ clip for attaching the pouch to a larger bag with an EVO SYSTEM™ dock, a tool or waist belt, trouser pocket, or magnetically mounting to surfaces inside a work van or equipment requiring service
- Sized to accommodate meter dimensions up to 8-1/2" × 4-1/4" × 2-1/4"
- Low-profile carrying handle for easy transport
- Attach gussets to limit opening to retain loose contents, or detach to enable pouch to open a full 180°
- 2 repositionable or removable elastic straps for securing meter for unobstructed use while pouch is open
- Internal elastic strap for storing leads
- Total of 5 internal and external pockets for additional storage
- External MOLLE for attaching additional items with a belt clip
- 2 D-rings
- 5-year limited warranty
Specs
| MB-S EVO Small Meter Bag Specs | |
|---|---|
| Height (H) | 9" (22.8 cm) |
| Width (W) | 5" (12.8 cm) |
| Depth (D) | 3.5" (9 cm) |
| Weight (empty) | 1.3 lb (0.6 kg) |
| Internal Volume | 81 in³ (1.3 L) |
| Max Payload | 8 lb (3.5 kg) 5 lb (2.5 kg) when magnetically mounted |
Includes
- (1) Veto Pro Pac MB-S EVO Modular Small Meter Bag
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!