Description
Veto Pro Pack UB3B Large Compact Utility Bag
Large compact utility bag with cinch-top bulk storage and external tool pockets
The UB3B is a large, compact utility bag featuring an expandable or closeable cinch-top bulk storage compartment with a with a water/oil resistant interior for easy clean up, perfect for storing hand tools, test equipment, a drill, a water bottle (up to 4.5" diameter), a soldering tank, etc. Built to handle any environment, it's equipped with an impact and water-resistant, injection-molded base that keeps the bag standing. For added versatility, the UB3B features a stainless- steel tape measure clip and 8 external pockets: 2 pass-through pockets and 2 large sleeve pockets for large hand tools, 2 standard pockets for smaller tools, and 2 small pockets for a pen, pencil or drill bits. It also comes with a detachable over-molded grip handle, a Repositionable Belt Clip (RBC) for securing the bag to a belt or larger tool bag, and a dual-gated carabiner for an alternative attachment option.
Key Features & Benefits
- Large main compartment with water-resistant, wipeable interior
- Expandable or closable cinch-top bulk storage
- Impact and water-resistant injection-molded base for durability
- 8 external pockets (2 pass-through, 2 large sleeve, 2 standard, and 2 small)
- Stainless-steel tape measure clip
- Detachable over-molded grip handle
- Repositionable Belt Clip (RBC)
- Dual-gated carabiner for alternate attachment options
- 2 D-rings for additional accessories
- 5-Year Limited Warranty
Specs
| Max Payload | 12 lbs / 5.5 kg |
| Weight (empty) | 1.4 lbs / 0.6 kg |
| Height | 8.5 in / 21.5 cm |
| Depth | 6 in / 15.3 cm |
| Width | 8 in / 20.3 cm |
| Internal Volume | 173 in³ / 2.8 L |
| Warranty | 5-Year Limited |
Includes
- (1) Veto Pro Pac UB3B Large Compact Utility Tool Bag
Resources
Veto Pro Pac UB3B Compact Utility Bag Datasheet
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will "clog" the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn't dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don't Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!