Description

Description

Bacharach Fyrite InTech Residential Combustion Analyzer with Reporting

An entry-level, easy-to-use combustion analyzer

TruTech Calibrates: Already have this analyzer and are in need of calibration or service? Our Cal-Lab can help you with that! Submit your calibration request using the Service Form and instructions HERE.

The Fyrite InTech is the perfect tool for entry-level and residential technicians who need to ensure safe operating conditions and determine combustion efficiency. The InTech features 6 fuels in the North American configuration to suit a wide variety of applications.

The InTech includes sensors for O2 and CO, with an option for an external NOx filter. The CO sensor can be replaced in the field without down time using B-Smart pre-calibrated sensors. The InTech calculates values like efficiency, CO2 and CO air-free to help monitor combustion processes effectively and accurately.

Note: The Fyrite InTech calculates CO2 value based upon other measured values during the combustion process. It does not measure CO2 directly.

Features:

Measures O2, CO, stack and air temperature for complete combustion analysis
Exclusive B-Smart pre-calibrated CO sensor for easy field replacement
Compatible with the Bacharach Reporting App
Six fuels available in North American configuration covering most applications like natural gas, oil 2 and propane
Includes reporting kit

Specs

Measurements:
O2 CO Stack temperature Ambient air temperature	0 to 20.9% 0 to 2000 ppm -4 to 1202 °F (-20 to 650 °C) -4 to 212 °F (-20 to 100 °C)
Display	2.7 in. (69 mm) monochrome LCD w/backlight
Power	4x AA batteries
Run Time	15 hours minimum (alkaline batteries)
Size (H x W x D)	8.0 x 3.6 x 2.3 in. (20.3 x 9.1 x 5.8 cm)
Weight	1 lb. (0.45 kg) including batteries
Fuels	Natural Gas, Oil #2, Oil #6, Propane, Kerosene and B5 (5% BioFuel in Oil #2)
Operating Conditions	23 to 113 °F (-5 to 45 °C), 15 to 90% RH (non-condensing), 1 ATM ± 10%
Warm-up Time	30 to 60 seconds
Memory	10 locations
Communications	USB 2.0 (mini-B), IrDA
Approvals	CE mark, EN 50379-1 & -3
Warranty	2 years (including sensors)

Includes

(1) Bacharach Fyrite InTech Residential Efficiency Analyzer
(1) Probe with 12 in. sample tube (approximately 6 ft. total length), water trap and particulate filter
(1) Hard Case
(8) AA batteries
(1) Rubber Boot
(1) IrDA wireless printer
(1) USB cable
(1) Fyrite User Software
(3) Spare filters