Viper Aerosol Coil Coating 15oz Spray Can, Permanent Epoxy Resin, Total Corrosion Protection

Viper Aerosol Coil Coating 15oz Spray Can

Total corrosion protection for any system

Viper Industrial Coil Coating is the same formulation supplied to factory OEM'S and custom coil manufacturers. It is the toughest and longest lasting coating you will ever use. Bonds to all metal surfaces and withstands temperatures to 400°F (205°C). The aerosol injector provides a flat vertical spray pattern for reaching deep into the coil body. In the field, simply apply a single coat to the front and back of the coil. There will be no significant loss of heat transfer when used as directed. Protects coils from salt water and many other chemically corrosive environments. Viper Coil Coating is a solvent borne clear coating that meets all State and Federal VOC regulations.

Key Features & Benefits

• Permanent Clear Epoxy based coating that resists extreme weather and chemical environments
• Dry in Under 1 Hour, a full cure may take longer depending on weather conditions
• Tough Formula bonds to all metal surfaces and withstands temperatures up to 400°F
• Protects all surfaces from salt water, acids, caustics, oxidation, and corrosive environments
• Unique Spray Pattern penetrates deep between the coil fins for total coverage
• No Loss of Heat Transfer When used as directed
• Used by OEM's, the same formula sent to manufacturers in aerosol form

Directions for Use:

1. Turn off or disconnect all power from system
2. Clean coil with Viper Brite, rinse, and allow surface to dry
3. Always wear protective gloves, goggles, and clothing. Use in well ventilated areas
4. Hold can a few inches away, apply a single coat to the front and back of the coil and all metal parts
5. Wait 30–60 minutes for product to dry, a full cure may take longer depending on weather conditions
6. All Done!