NAVAC Rapid Recovery Kit - Entry Level

NAVAC Rapid Recovery Kit - Entry Level

NAVAC NRDD Brushless DC Recovery Unit

The NRDD recovery unit offers exceptionally efficient vapor recovery due to the twin-cylinder compressor and oversized condenser with two rows of microchannel coils.

The NRDD recovery unit features a Brushless DC Motor making it lightweight and much more efficient, a large backlit display, twin cylinder design with 2-row oversized condenser, oil free compressor and self-purging functionality. This DC motor technology also provides better starting performance under low voltage conditions. The NRDD recovery unit is suitable for all commonly used refrigerants making it the ideal recovery unit!

2 Year Over the Counter Warranty, Extends to 3 years with registration through NAVAC!

Appion MGAVCT 1/4" Standard Vacuum-Rated Valve Core Removal Tool

Core tools are one of the most important components of a proper evacuation rig. Removing the cores allows for a full unrestricted flow through the service port significantly decreasing both evacuation and or recovery times. Standard core tools are only designed to operate under pressure to allow for the replacement of leaking valve cores without the removal of the refrigerant. Appion core tools are rated for both vacuum and pressure allowing for typical service as well as faster evacuations and recovery. A side port allows for isolation of the hoses for determining the level of vacuum during the evacuation process. Engineered for vacuum, Appion core tools are the best money can buy.

Features:

Vacuum rated to 20 microns

Easily remove access valve cores for full, unrestricted flow

Double O-Ring ball valve seal for accurate "blank off" vacuum testing

1/4" side port for vacuum gauges

MegaSeal cap made from aircraft-grade aluminum and molded neoprene gasket, reliably seals under pressure and vacuum

MegaGrip core grip tip for easy, reliable core removal, minimizing lost cores

Machined stainless stem that cannot separate from core tool during service

Appion MH380004AAY 3/8” Dia. Hose, 4-foot, 1/4”FL to 1/4”FL Yellow

Vacuum-certified MegaFlow Hoses are ultra-flexible and ultra-reliable, with larger interior diameter for high speed recovery and evacuation.

Features and Benefits:

• Vacuum rated to 20 microns
• Larger interior diameter for superior performance
• Rated for use with R410A and all common refrigerants
• All hoses are available in custom length, color, and fitting combinations
• Every hose is tested and evacuated before shipping
• Ultra-flexible for easy connections in tight spaces
• 4000 psi burst and 800 psi working pressure for 1/4" and 3/8" hoses
• 3200 psi burst and 640 psi working pressure for 1/2" hoses

Larger Hoses for System Evacuation

Even when restricted by 1/4" system ports, using a 3/8" or 1/2" hose greatly reduces resistance and increases potential flow. This is especially true during system evacuation. Just using one 1/2" hose with 1/4" fittings can result in one tenth the evacuation time compared to one 1/4" hose.

Or look at it the other way: using 1/4" hose can make an evacuation take up to 10 times longer than when using 1/2" hoses!

CPS CRX430T Recovery Tank 30lb 400 PSIG

D.O.T. approved 30lb recovery tank with ¼" SAE male fittings.

• Water Capacity: 26.2lb / 11.9kg
• DOT Specification: DOT04BA-400
• Service Pressure: 400 PSIG

Appion KTF032 Filter Dryer Kit (Size 032 Filter and 12" Adapter Hose)

For use with Appion G1 and G5 Recovery Units.

Software / App