Description
Fieldpiece Complete Combustion Testing Kit including CAT85 Analyzer, SDMN6 Manometer, and SC680 Clamp Meter
The Fieldpiece Complete Combustion Testing Kit includes the CAT85 Analyzer, SDMN6 Manometer, and SC680 Clamp Meter. This kit is perfect for HVAC technicians who need to perform combustion testing on their equipment. The CAT85 Analyzer provides accurate and reliable readings, while the SDMN6 Manometer and SC680 Clamp Meter provide the tools necessary to complete combustion testing.
Kit Includes:
- (1) Fieldpiece CAT85 Combustion Analyzer
- (1) Fieldpiece SDMN6 Dual-Port Manometer
- (1) Fieldpiece SC680 True-RMS Wireless AC Clamp Multimeter
- (2) Fieldpiece SPK2 Folding Pocket In-Duct Thermometer
- (1) Sensorcon INS2-CO-03 Inspector Industrial Pro Portable CO Monitor (0-500 PPM Carbon Monoxide)
- (1) ESP Ole Switcheroo Furnace Magnet
- (1) Klein Tools KTSB01 Step Drill Bit #1 Double-Fluted
- (1) NCI Silicone Heat Resistant Combustion Test Plugs - Pack of 100
- (1) NCI 3/8" Center Pull Tapered Plastic Test Plug - Pack of 500
Fieldpiece CAT85 Combustion Analyzer with HydroCycle
Built Tough Enough for any Heating Job
The Fieldpiece CAT85 Combustion Analyzer HC provides a hassle-free solution for technicians to get the job done quickly, easily, and safely while improving system efficiency. Accurate sensors of O2, CO, pressure, and temperature along with powerful trending, provide key insight into equipment performance. SensorVault technology seals to prolong sensor life. A large, high-contrast 5.5" touchscreen display helps you easily view measurements. Save your customer data with dedicated fields for client information and create trend reports for advanced diagnosis. Live draft pressure measurement maintains accuracy throughout your combustion test. Dual manometer ports are also included for convenience. The combustion probe uses a patent pending HydroCycle pump to return condensate back into the flue - no more water trap hassles!
Key Features and Benefits
- Accurately measure O2, CO, CO2, draft pressure
- Built-in manometer means one less tool to carry
- Automatically separates and returns accumulated water to the flue using the patent pending HydroCycle Pump technology.
- Lower cost of ownership with four-year sensor warranty
- Large 5.5" touchscreen display with one-touch power on
- Field-replaceable sensors to maximize uptime
- Troubleshoot while running analysis with live draft pressure
- Patent pending SensorVault technology prolongs sensor life
- Connect with Job Link System App, industry-leading 1000' wireless range
- USB-C chargeable while in use
- 1 Year Manufacturer Device Warranty
- 4 Year Manufacturer Sensor Warranty
Breakthrough Innovation HydroCycle
The CAT85 does not have a water trap. Instead, flue gas condensate is automatically pumped back out of the front of the probe at a regular interval. Point the probe downwards as you remove it to empty any remaining condensate before storing. Also, the CAT85 offers a built-in manometer so you can carry one less tool.
Breakthrough Innovation SensorVault
The SensorVault technology of the power button unseals sensors when powering on and and seals the sensors when powering off. SensorVault technology prolongs the life of sensors, but they eventually need to be replaced. When it does come time to replace sensors, CAT85 makes it quick and painless. Replacement sensors have calibration data built-in and do not require calibration. When a sensor's life drops below 5%, a notification appears during startup to inform you it's time to replace it. You can view estimated remaining life at any time in SETTINGS.
Simplicity Redefined
Featuring a high contrast, 5.5" touchscreen display, the CAT85 makes it easy to view measurements, whether your jobsite is a dimly lit basement or bright rooftop. You can also save your customer data with dedicated fields for client information. If you require advanced diagnoses, a live trend report is available with O2, CO and CO2 readings.
Reliable & Rugged
The CAT85 can tackle any jobsite conditions with its durable construction and rubberized casing. The magnetic back lets you work hands-free and the padded hardline carrying case includes multiple inserts for accessories.
Rugged Construction
Durable construction and rubberized casing make the CAT85 tough enough to tackle any jobsite conditions. The magnetic back also lets you work hands-free and the padded hardline carrying case has multiple inserts for accessories.
Jobsite Documentation
Seamlessly connect to Fieldpiece Job Link System App to view trends, draft pressure, and customer details, all with industry-leading 1000' wireless range. A wireless printer is also available for jobsites that require documentation printouts.
Fieldpiece SDMN6 Dual-Port Manometer
Do More with the Pressure You Need
Industry Exclusive Manometer
- Gas, static, and differential pressure
- Test pressure switches
- Easily calibrate any adjustable pressure switch
- Great for diagnosing furnace performance
The SDMN6 dual-port manometer measures gas and static pressure and also accurately tests pressure switches by simulating a draft with an internal pump. A pressure switch is a safety device that prevents the furnace from running in an unsafe manner. The SDMN6 tests the pressure switch to determine if it is working properly, or if it is starting to fail which can cause the furnace to run in an unsafe manner. Plus, with the SDMN6 you can easily calibrate any adjustable pressure switch to manufacturers' specification, so there's no need to carry a large variety of pressure switches on your truck.
The Dual Port Manometer has the ranges to measure gas pressure and the resolution needed to measure static pressure. Ideal for HVACR field service technicians, the SDMN6 can determine if the gas pressure coming into the house or out of the regulator are correct. The SDMN6 measures gas pressure up to 60" water column (WC) with a resolution of 0.1" WC. In addition, the unit measures both positive and negative pressure, which is used for measurement on vacuum control lines. The unit will take differential pressure readings and display the difference between P1 and P2 at all times in the lower right corner of the easy-to-read LCD. Four different measurement scales can be used: inches of water column, millimeters of water column, mBar, and PSI.
The SDMN6 also has a zero adjust to zero out the meter in different ambient pressures. It has a hold button to hold the currently displayed reading. The auto-power-off function conserves battery life, but can be disabled if desired. In the static pressure mode, the unit can measure up to 2"WC with resolution to 0.010"WC, which enables a technician to measure small differences in air (or static) pressure.
Fieldpiece SC680 True-RMS Wireless AC Clamp Multimeter
Direct integration with Job Link System App!
Top-of-the-Line HVAC/R Meters
Whether you're working on small circuitry in mini-splits or on large commercial units, the new SC680 is packed with everything you need to install, service, and troubleshoot any HVAC/R system. Not only do these meters communicate with Job Link, but you can also measure power consumption (kW) to determine system efficiency, verify 3-phase rotation with just two leads, take more accurate VAC and AAC readings with True RMS, and filter out noise to get true voltage and frequency with low pass filter.
Features:
- Measures power (kW) to track system energy consumption
- True RMS (TRMS) readings through the clamp or leads
- Low Pass Filter (LPF) to remove noise and get true voltage on VFD
- Capture starting amps with InRush feature
- Voltage accuracy suitable for use on variable frequency drives (VFDs)
- Indicates 3-phase rotation with two leads, no need to carry the extra lead
- Measures start/run capacitors
- Magnet for mounting meter during use
- Test diodes and resistance up to 50 MegOhms
- Molex tip leads for small power connectors
- Safety rated CAT IV-600V/CAT III-1000V
- DC Amps and diode for mini-split inverters
- Dual temperature for delta T
- Swivel clamp head to view readings at any angle
- Open the clamp and an LED worklight comes on to help spot the bundle you are hunting (SC680 only)
- Slim size to work in tight spots like mini-split boards
- Test lead storage
- Backlit dial
Direct Integration with Job Link System App!
Pair all your Job Link tools in the Job Link App to receive and document a complete system snapshot wirelessly. From the new SC480 and SC680 clamp meters and SM380V and SM480V manifolds, to the JL3 Job Link Probes, and SRS3 scale, all measurements are live and in real time so you can see exactly how adjustments are affecting the system.
Document all Measurements
Clearly communicate the health of the system with your co-workers and customers. Proven to help reduce call backs and increase sales.
- Wireless bluetooth beacon
- Up to 1000 feet (305m) line of sight. Distance decreases through obstructions.
- Document electrical measurements
- Calculate power and system efficiency
- Measure accurate blower amperages behind the door
- Wireless monitoring of compressor VAC and AAC
Sensorcon INS2-CO-03 Inspector Portable CO Monitor (0-500 PPM Carbon Monoxide)
Electrochemical sensors for fast & accurate measurements of CO
The Sensorcon Inspector Portable Carbon Monoxide Monitor is professional-grade and is excellent for both personal, and on-the-job usage. From HVAC/R to home inspectors to firefighters, the Inspector will help you get the job done. The advanced sensor technology allows for accurate readings of carbon monoxide concentrations. The Industrial Pro is the most advanced model, featuring adjustable audio, visual, and vibration alarms.
This model also comes equipped with a new Time Weighted Average exposure feature, to allow for constant measuring of your carbon monoxide level over a 24-hour time period. Additionally, this model features High/Low alarm set points, that can be adjusted to trigger at certain levels of ppm.
Key Features and Benefits
- Measuring range: 0-500ppm
- Portable and lightweight
- Alarm with visual, audio and, vibration feedback
- Certified Intrinsically Safe
- User-friendly interface
- Steel clip and lanyard loop
- Water-resistant and shock-resistant
- Battery life up to 2 years
- Adjustable high / low alarm set points
- 24 Hour Time Weighted Average mode
Fieldpiece SPK2 Folding Pocket In-Duct Thermometer
The newly designed SPK2 Folding Pocket Thermometer is great for taking quick air temperatures. It fits directly in your pocket so you're ready for common temperature checking. The folding rod has a hanging hook so you can easily hang it in a duct or on a grille. The large display shows Min/Max/Hold, has measurements in both Fahrenheit and Celsius, and has a low battery indicator. It also quickly calculates T1-T2, as well as features an Auto Power Off function to save battery power on it's already phenomenal 8,000 hours of battery life on one single AA battery!
ESP Ole Switcheroo Furnace Magnet
The Old Switcheroo is a heavy duty industrial magnet designed to hold down pop out switches while the technician trouble shoots the furnace or air handler. Two wings will reach out to switches that are set apart from a flat metal surface.
Klein Tools KTSB01 Step Drill Bit #1 Double-Fluted
Features
- Two flutes cut faster and keep bit cooler
- Fast-starting, non-walking drill tip
- High-visibility silver step targets for primary hole sizes
- Thick 3/8-Inch hex shank provides a firm, positive grip and won't spin out in the drill
- 13 hole sizes
NCI Silicone Heat Resistant Combustion Test Plugs - Pack of 100
Test plugs are essential during CO and combustion testing. Use these heat resistant plugs to cover test holes on high and low temperature equipment flues. Heat resistant to 600F. Fits openings from .33" to .5" in diameter. Tapered design features superior sealing ability for onsite applications. Designed for easy insertion and removal.
Key Features & Benefits
- Fits openings from 1/3" to 1/2" in diameter
- Heat resistant up to 600°F
- 100 per bag
NCI 3/8" Center Pull Tapered Plastic Test Plug - Pack of 500
Test plugs are essential during air diagnostic testing. Protect the drill site from moisture, leakage and dirt. The tapered design features superior sealing ability for on-site applications. The plugs include a handy pull-tab to make it easy to remove.
Specs
| CAT85 Specs | |||
|---|---|---|---|
| Display | Touchscreen TFT LCD (5.5 in diagonal) | ||
| Probe Size | 10.7 in (272 mm) length, 0.32 in (8.0 mm) diameter | ||
| Accuracy | Stated accuracies at 23°C ±5°C, <75% R.H. | ||
| Manometer Ports | 2 connectors (P1, P2) for flex tubing (4.5mm to 8.0mm ID, not included) |
||
| Battery Type | 3.7 VDC (nominal), 6400mAh, non-replaceable | ||
| Battery Life | 7 hours typical (pump running 80% of the time) | ||
| Charge Time | < 7 hours typical @ 5V/2A DC power (power adapter not included) | ||
| Charging Port | USB-C (Usable when connected to power) | ||
| Memory | 1000 jobs (approx.) | ||
| Warm Up Time | 45 seconds (90 seconds near freezing) | ||
| Operating Environment | 14°F to 104°F (-10°C to 40°C); < 75% RH (non-condensing) | ||
| Storage Temperature | -4°F to 140°F (-20°C to 60°C); < 80% RH | ||
| Weight | 44.25 oz (1255 g) with probe | ||
| Wireless Range | 1000 feet (305 meters) | ||
| Fuel Types | Natural Gas, Propane (LPG), Oil #2 (Light), Oil #6 (Heavy), Biofuel, Coal, Coal Town Gas, Coking Oven Gas, KOKS, Custom (x3) | ||
| Manufacturer Warranty | 1 year (4 years sensors only) | ||
| Job Link System Minimum | BLE 4.0 devices running iOS 7.1 or Android™ Kitkat 4.4 Latest compatibility at www.fieldpiece.com |
CAT85 Sensors | |
| Sensor Type | Response Time | Max Overload | |
| Temperature | Type K rod thermocouple (fixed) | < 30 seconds (T90) | |
| Oxygen (%) | Electrochemical (replaceable) | < 30 seconds (T90) | 30% Oxygen |
| Carbon Monoxide (PPM) | Electrochemical (replaceable) | < 90 seconds (T90) | 10000 ppm Carbon Monoxide |
| Pressure Probe (inWC, torr, Pa) | Piezoresistive pressure sensor | < 10 seconds (T90) | 4.0 inWC will cause damage |
| Pressure Ports (inWC, torr, Pa) | Silicon pressure sensors | < 10 seconds (T90) | 11.6 psig (321 inWC) causes damage | CAT85 Testing Parameters |
| Range | Best Resolution | Accuracy | |
| Stack Temperature | 32 to 752°F; 0 to 400°C | 0.1°F; 0.1°C | ±2.5°F [32°F to 212°F], ±(3.6°F or 1.5%rdg) [213°F to
752°F]; ±1.4°C [0°C to 100°C], ±(2.0°C or 1.5%rdg) [101°C to 400°C] |
| Oxygen O2 | 0 to 21 vol.% | 0.1 vol.% | ±0.3 vol.% |
| Carbon Monoxide CO | 0 to 4000 ppm | 1 ppm | ±20 ppm [0 to 400 ppm], ±5%rdg [401 to 2000 ppm], ±10%rdg [2001 to 4000 ppm] |
| Draft Pressure | 0 to ±0.8 inWC | 0.01 inWC | ±0.02 inWC |
| CO Air Free (Calculated) | 0 to 4000 ppm | 1 ppm | |
| CO2 (Calculated) | 0 to CO2max vol.% | 0.1 vol.% | |
| Excess Air (Calculated) | 0 to 999% | 0.1% | |
| Efficiency (Calculated) | 0 to 100% | 0.1% | |
| qA (Calculated) | 0 to 25% | 0.1% | |
| Dew Point (Calculated) | 32 to 212°F; 0 to 100°C | 0.1°F; 0.1°C | |
| Primary Air Temp | 32 to 212°F; 0 to 100°C | 0.1°F; 0.1°C | ±2.5°F [32°F to 212°F]; ±1.4°C [0°C to 100°C] |
| Ambient CO | 0 to 200 ppm | 1 ppm | ±20 ppm |
| Manometer | 0 to ±40 inWC | 0.01 inWC | ±0.2 inWC [0 to ±20 inWC], ±1%rdg [±(20.1 to 40.0 inWC)] |
| Fuel Pressures | 0 to 40 inWC | 0.01 inWC | ±0.2 inWC [0 to 20 inWC], ±1%rdg [20.1 to 40.0 inWC] |
| SC680 Volts AC (VAC) True RMS (50-400Hz) | |
|---|---|
| Ranges: | 1000mV, 10V, 100V, 750V |
| Resolution: | 0.1mV |
| Accuracy: | ±(1.5% + 10) 50Hz to 60Hz ±(2.0% + 10) 60Hz to 400Hz Unspecified at 400Hz and greater |
SC680 Volts DC (VDC) |
| Ranges: | 1000mV, 10V, 100V, 1000V |
| Resolution: | 0.1mV |
| Accuracy: | ±(0.5% + 5) | SC680 Amps AC (AAC) True RMS (50-60Hz) |
| Ranges: | 100A, 600A |
| Resolution: | 0.01A |
| Accuracy: | ±(2.5% + 15) 100A ±(2.0% + 10) 600A |
SC680 Frequency (Hz) Through Clamp |
| Ranges: | 10Hz to 400Hz |
| Resolution: | 0.1Hz |
| Accuracy: | ±(0.1% + 5) | SC680 Amps DC (ADC) |
| Ranges: | 100A, 600A |
| Resolution: | 0.01A |
| Accuracy: | ±(2.5% + 15) 100A ±(2.0% + 10) 600A |
SC680 MicroAmps DC (µADC) |
| Ranges: | 1000µA |
| Resolution: | 0.1µA |
| Accuracy: | ±(1.0% + 5) | SC680 Frequency (Hz) Through Leads |
| Ranges: | 100Hz, 1000Hz, 10kHz, 100kHz, 1000kHz |
| Resolution: | 0.01Hz |
| Accuracy: | ±(0.1% + 5) | SC680 Duty Cycle (%) |
| Ranges: | 5%-95% (40Hz to 1kHz) 10%-90% (1kHz to 10kHz) 20%-80% (10kHz to 20kHz) |
| Resolution: | 0.1% |
| Accuracy: | ±(2% + 10) | SC680 Capacitance (MFD) |
| Ranges: | 10nF, 100nF, 1000nF, 10µF, 100µF, 1000µF, 10mF |
| Resolution: | 0.01nF |
| Accuracy: | ±(3% + 15) 10nF, ±(3% + 5) 100nF to 1000µF, ±(5% + 5) 10mF | SC680 Resistance (Ω) |
| Ranges: | 100Ω, 1000Ω, 10kΩ, 100kΩ, 1000kΩ, 10MΩ, 50MΩ |
| Resolution: | 0.01Ω |
| Accuracy: | ±(1.0% + 15) 100Ω, ±(1.0% + 5) 1000Ω to 100kΩ, ±(1.5% + 5) 1000kΩ, ±(3.0% + 5) 10MΩ to 50MΩ | SC680 Continuity |
| Ranges: | 100Ω |
| Resolution: | 0.01Ω |
| Response time: | 100ms | SC680 Diode Test |
| Test current: | 0.8mA (Approx.) |
| Open circuit volts: | 3.2VDC typical |
| Accuracy: | ±(1.5% + 5) | SC680 Dual Temperature (T1, T2, T1-T2) |
| Ranges: | -58°F to 2372°F, (-50°C to 1300°C) |
| Resolution: | 0.1° |
| Accuracy: | ±(1°F) 32°F to 120°F, ±(1°C) 0°C to 49°C ±(1%+2°F) 32°F to 932°F, ±(1%+1°C) 0°C to 500°C ±(2%+6°F) -58°F to 32°F, ±(2%+3°C) -50°C to 0°C ±(2%+6°F) 932°F to 2372°F, ±(2%+3°C) 500°C to 1300°C |
SC680 Phase Rotation Test (L1L2, L1L3) |
| Ranges: | 80±5 VAC to 600VAC (50Hz to 80Hz) |
| Resolution: | 0.1V |
| Accuracy: | ±(1.5% rdg + 10 dgts) |
| SDMN6 Manometer Specs | |
|---|---|
| Operating environment | 32°F to 118°F (0°C to 48°C) at <80% RH |
| Storage temperature | -4°F to 140°F (-20°C to 60°C), 0 to 80% RH (with battery removed) |
| Power | 9V, NEDA 1604A, IEC 6LR61 9V alkaline battery |
| Battery life (alkaline) | 200 hours (manometer only, backlight off), 12 hours (pressure switch testing @ 27% pump speed, BL off, approx -2.5″WC induced pressure w/o pump bleed accessory) |
| Auto power off (APO) | 15 minutes |
| Units of Measure | inWC, mmWC, mbar, psi |
| Resolution | 0.01 inWC |
| Overrange | "OL" or "-OL" is displayed |
| Max Pressure | 900inWC (17.4psi) will damage sensors |
| Compatible media | Dry, non-corrosive gases |
| Pressure ports | 2 connectors (P1, P2) for flexible tubing (4.5mm to 8mm ID) |
| Pump port | 1 connector (PUMP) for 5mm (~3/16 inch) ID flexible tubing |
| Lead jacks | 2 banana plug jacks for testing open/close switch status (continuity between terminals) |
| Accuracy and ranges | inWC: ±0.02 on 0.00 to ±2.00 (±1.5% FS on 2.00 to ±60.0) mmWC: ±0.5 on 0.00 to ±51.0 (±1.5% FS on 51.0 to ±1500) mbar: ±0.05 on 0.00 to ±5.00 (±1.5% FS on 5.00 to ±150.0) psi: ±0.001 on 0.000 to ±0.07 (±1.5% FS on 0.07 to ±2.000) |
| Fieldpiece SPK2 Thermometer Specs | |
|---|---|
| Operating Environment: | 32°F to 122°F (0°C to 50°C) |
| Measuring Range: | -58°F to 392°F (-50°C to 200°C) |
| Accuracy: | ±1.8°F (-3.8°F to 247.8°F) ±3.6°F (-58°F to -3.8°F, 247°F to 392°F) ±1.0°C (-9.9°C to 119.9°C) ±2.0°C (-50°C to -10°C, 120°C to 200°C) |
| Best Resolution: | 0.1° |
| Over Limit Indication: | Displays OL or -OL |
| Low Battery Indication: | Blinking empty battery icon |
| Battery: | 1 x AA (included) |
| Battery Life: | About 8000 hours |
| Auto Off: | 15 minutes |
| Sensorcon Inspector CO Monitor Specs | |
|---|---|
| CO Range | 0 - 500ppm |
| Display Range | 0 - 1999ppm |
| Resolution | 1ppm |
| Accuracy | ±10%, 0 to 500ppm |
| Initial Response Time | <5 seconds |
| T90 Response Time | <20 seconds |
| Battery Life | 2 Years (depending on alarm condition) |
| Alarms | Audio, Visual, Vibrating (adjustable high / low) |
| Size | 3.2" x 2.2" x .86" |
| Weight | 4 ounces |
| Warranty | 2 Years |
| Klein Step Bit Specs | |
|---|---|
| Application | For Multi-Material Drilling |
| Material | High Speed Steel |
| Quick Reference | #1 |
| Number of Holes | 13 |
| Increment | 1/32" (0.8 mm) |
| Size | 1/8" to 1/2" (3.2 to 12.7 mm) |
| Weight | 0.80 oz (22.7 g) |
Includes
- (1) Fieldpiece CAT85 Combustion Analyzer
- (1) CAT85 Combustion Analyzer HC (including probe)
- (1) Carrying case - ANC85
- (2) Cones - RCONE3
- (10) Filters - RFC10
- (1) USB cable
- (1) Manual
- (1) Fieldpiece SDMN6 Dual-Port Manometer
- (1) SDMN6 - Dual Port Manometer and Pressure Switch Tester
- (1) ANC1 - Four Pocket Carrying Case
- (2) ASP2s - Static Pressure Probes
- (2) RMA316 - Pressure Tubes
- (2) Quick Connect Leads
- (3) Hoses and (1) Y-splitter
- (2) Hoses with Brass Screw Fittings
- (1) Fieldpiece SC680 True-RMS Wireless AC Clamp Multimeter
- (1) SC680 Clamp Meter
- (1) RCT2 Molex Probe Tips
- (1) ADLS2 Silicone Leads
- (1) ASA2 Gator Clip Leads
- (2) ATB1 Type K Thermocouples
- (2) Velcro Straps
- (1) 9V Alkaline Battery
- (1) ANC7 Protectice Padded Case
- (2) Fieldpiece SPK2 Folding Pocket In-Duct Thermometer with Battery
- (1) Sensorcon INS2-CO-03 Inspector Industrial Pro Portable CO Monitor (0-500 PPM Carbon Monoxide)
- (1) ESP Ole Switcheroo Furnace Magnet
- (1) Klein Tools KTSB01 Step Drill Bit #1 Double-Fluted
- (1) NCI Silicone Heat Resistant Combustion Test Plugs - Pack of 100
- (1) NCI 3/8" Center Pull Tapered Plastic Test Plug - Pack of 500
Resources
Fieldpiece CAT85 Manual
Software / App
Download the Fieldpiece Job Link App for your Android or iOS devices
Link Your Tools. Link Your Jobs
Job Link. More than just measurements.
The Job Link System works with all Fieldpiece wireless tools from clamps to probes to digital manifolds, and integrates all of their functionality seamlessly. Job Link increases your level of professionalism on every job and in the back office by allowing you to not only eliminate your clipboard but also virtually adding another technician to the job because you can be in more than one place at a time. Reduce callbacks and increase efficiencies with reliable and trusted system measurements, diagnostics, and reporting!