Description
Veto Pro Pac MB4B Large Gatemouth Meter Backpack Bag with Padded Insert Box
A unique and versatile vertically oriented tool carrying solution
The MB4B is a gate mouth style meter bag enabling quick and easy access to the inside of the bag. Wear the MB4B over both shoulders using the included backpack straps, over a single shoulder via the optional padded shoulder strap (sold separately), or at your side with the leather-gripped handles. The MB4B comes with the Padded Insert Box. The divider inside the removable padded insert box can be repositioned to secure and separate a meter from other tools; three internal pockets enable further partitioning of tools, and the MB4B features 11 exterior pockets on the side and front as well as a padded tablet computer pocket on the back.
Key Features and Benefits
- Vertical oriented gate mouth meter bag
- Detachable/optional backpack straps
- One customizable storage bay with “pull-out” padded insert box offering movable padded dividers
- 11 exterior tool pockets
- Padded Tablet Pocket on Backside
- 8" electrical tape strap
- Rugged #10 locking zippers
- Polypropylene plastic base for moisture and abrasion protection
- 5-year limited manufacturer warranty
Specs
PRODUCT SPECIFICATIONS:
- Height: 17” (43cm)
- Width: 14" (35.5cm)
- Depth: 8" (20.5cm)
- Weight (empty): 4.5 lbs (2kg)
- Internal Volume: 675in3 (11L)
- Max Payload: 40lbs (18k)
Includes
- (1) Veto Pro Pac EDC PAC LCB CARBON Everyday Carry Backpack Carbon
- (1) Padded insert box
Resources
Veto Pro Pac Tool Bags Product Care and Maintenance
Keep the Zippers Clean & Lubricated
Over time, dirt and grit will clog the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don t Overstuff the Bag
Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed proceed with caution!