Description
Testo Professional Smart Probe Kit for measureQuick with Optional Electrical and Pressure
Incorporating Testo Products. Works with measureQuick!
NEW! Bluetooth range of up to 350 feet
Kit Includes:
- (Choice of) No Meter, SC680 & 510i, or VOLT-100 & 510i
- (2-3) Testo 115i Pipe Clamp Thermometer Smart Probes
- (3) Testo 605i Humidity Smart Probes
- (2) Testo 549i Refrigeration Pressure Smart Probes
- (2) CPS 1/4" SAE Tee Valve Connectors
- (3) AAA Batteries Per Probe (24 Total)
- (1) Testo HVAC Softcase
The testo AC & Refrigeration test and load kit includes two testo 549i high-pressure measuring instruments, three testo 605i thermohygrometers and three testo 115i clamp thermometers for pressure, (air) temperature and humidity measurement. In conjunction with a smartphone or tablet, the kit is ideally suited to servicing and troubleshooting on air conditioning and refrigeration systems, as well as their installation. The testo 549i and testo 115i can be quickly and easily attached directly at the pressure connection or the temperature measuring point. It is now considerably easier to work at a longer distances, thanks to improved wireless connection to your smartphone or tablet.
The measuring values of both instruments are transmitted via Bluetooth to the testo Smart Probes App installed on your terminal device enabling convenient and flexible readout there. In addition, the App enables automatic calculation of evaporation and condensation temperatures as well as of heating/cooling capacity/output. All measurement data is viewable either as a diagram or a table. Finally, the measurement data report can be e-mailed directly as a pdf or Excel file.
Take it the next step further and choose either the Fieldpiece SC680 or CPS VOLT-100 Electrical Meter to get a full read on the system. These also come with the Testo 510i Dual-Channel Pressure Manometer for measuring static pressure, pressure drop across filters or coils, and gas flow when paired with the included pitot tube.
Key Features & Benefits
- NEW! Bluetooth range of up to 350 feet
- Choose an electrical meter with dual pressure manometer to add on
- Measure high-side & low-side refrigerant pressure & temperatures (simultaneously) of AC/refrigeration systems
- Testo 549i now includes 45° angled hose connections
- Testo 605i now includes 90° foldable probe with built in attachment magnets
- Measurement data is transmitted to the convenient and powerful testo Smart Probes App in your smart device
- Calculate superheat and subcooling in the Smart Probe App
- Tough, accurate, and easy-to-use
- HVAC softcase holds the complete set of smart probes
- Operates with iOS or Android smart devices such as smart phones, tablets, etc.
Testo 510i Differential Pressure Manometer Wireless Smart Probe
Choose from the options above
The testo 510i Smart Probe is a wireless differential pressure probe used for accurate low-pressure measurements. The testo 510i is great for measuring pressure in manifolds, static pressure, and pressure drops in buildings or ventilation systems. Use it to measure the pressure drop across coils and filters, or in ducts and systems.
Users can read the measurements using the testo Smart app installed on their smart device. It can be used for determining air velocity and volume flow, when used with pitot tubes (not included). The testo 510i works on smart devices with either Android or Apple operating systems. The testo Smart app is a powerful and easy to use tool. It allows you to remotely read measurements from up to six (6) Smart Probes, and easily document and report the results. Automatic calculations make it a snap! All measurement data is displayed as instrument readings, tables, or graphs. The measurements can be quickly saved as PDF or Excel files. The app creates custom reports, which can be saved and/or shared by email. All your data can be stored and retrieved, saving you hours of time consuming paperwork!
Key Features & Benefits
- Pocket-sized temperature and air density-compensated differential pressure measurement
- Measures static pressure, air flow, and volume flow (pitot tube not included)
- Measures manifold pressure and pressure drop across filters and coils, and has a measurement menu in the Smart app that includes pressure drop alarms
- Magnetic back holds instrument for hands-free operation
- Measurement of air humidity and temperature in rooms and ducts
- Determination of refrigeration/heating performance with two testo 605i
- Automatic calculation of the dewpoint and wet bulb temperature
- Problem-free use at measuring points that are a long distance apart - Bluetooth range up to 350 ft
- Measuring ranges 0 to 100 %RH and -4 to 140 °F
CPS VOLT-100 Wireless Clamp Power Meter with InRush, True RMS
Choose from the options above
The CPS VOLT-100 is a portable, professional multifunction instrument with an LCD display for obtaining electrical measurements. It can be used as a conventional clamp meter or may be paired to Apple & Android smartphones & tablets via Bluetooth for additional functionality.
Key Features & Benefits
- Use with or without the CPS Link app
- Connects to Apple and Android smartphones & tablets via Bluetooth
- Power factoring to determine true power consumption
- Data logging of electrical readings
- Utility data feed calculates actual cost/hour of appliances
- CAT III 1,000 V rating
- True RMS measurements
- Non-contact voltage tester
- Maximum Voltage: 750 V AC; 1000 V DC
- Auto range and manual measuring
- Measuring range overload protection
- Display auto-off
- Display backlight
- Automatic polarity indication
- Max/Min and relative measuring function
Measures
- Inrush current
- AC current
- Resistance
- AC/DC voltage
- Phase angle
- Harmonics
- Frequency
- Capacitance
- Duty cycle
- Diode connection
Fieldpiece SC680 True-RMS Wireless AC Clamp Multimeter
Choose from the options above
Top-of-the-Line HVAC/R Meters
Whether you're working on small circuitry in mini-splits or on large commercial units, the new SC680 is packed with everything you need to install, service, and troubleshoot any HVAC/R system. Not only do these meters communicate with Job Link®, but you can also measure power consumption (kW) to determine system efficiency, verify 3-phase rotation with just two leads, take more accurate VAC and AAC readings with True RMS, and filter out noise to get true voltage and frequency with low pass filter.
Key Features & Benefits
- Measures power (kW) to track system energy consumption
- True RMS (TRMS) readings through the clamp or leads
- Low Pass Filter (LPF) to remove noise and get true voltage on VFD
- Capture starting amps with InRush feature
- Voltage accuracy suitable for use on variable frequency drives (VFDs)
- Indicates 3-phase rotation with two leads, no need to carry the extra lead
- Measures start/run capacitors
- Magnet for mounting meter during use
- Test diodes and resistance up to 50 MegOhms
- Molex tip leads for small power connectors
- Safety rated CAT IV-600V/CAT III-1000V
- DC Amps and diode for mini-split inverters
- Dual temperature for delta T
- Swivel clamp head to view readings at any angle
- Open the clamp and an LED worklight comes on to help spot the bundle you are hunting (SC680 only)
- Slim size to work in tight spots like mini-split boards
- Test lead storage
- Backlit dial
Direct Integration with Job Link® System App!
Pair all your Job Link® tools in the Job Link® App to receive and document a complete system snapshot wirelessly. From the new SC480 and SC680 clamp meters and SM380V and SM480V manifolds, to the JL3 Job Link® Probes, and SRS3 scale, all measurements are live and in real time so you can see exactly how adjustments are affecting the system.
Document all Measurements
Clearly communicate the health of the system with your co-workers and customers. Proven to help reduce call backs and increase sales.
- Wireless bluetooth beacon
- Up to 1000 feet (305m) line of sight. Distance decreases through obstructions.
- Document electrical measurements
- Calculate power and system efficiency
- Measure accurate blower amperages behind the door
- Wireless monitoring of compressor VAC and AAC
Specs
| Testo 115i | |
|---|---|
| Sensor type | NTC |
| Measuring range | -58 to 302 °F |
| Accuracy ±1 digit | ±2.3 °F (-4 to 185 °F) |
| Resolution | 0.1 °F |
| Clamp opening diameter | 0.25 to 1.5 in |
| Battery life | 250 hrs |
| Dimensions | 7.2 × 3.5 × 1.2 in |
| Measuring units | °F, °C |
| General Specifications | |
| Bluetooth range | up to 350 ft |
| Storage temperature | -4 to 140 °F |
| Operating temperature | -4 to 122 °F |
| Compatibility |
Requires iOS 8.3 (or later) / Android 4.3 (or later) Requires mobile device with Bluetooth 4.0 |
| Battery type | 3 AAA batteries |
| Warranty | 2 years |
| Testo 549i | |
| Sensor type | Pressure |
| Measuring range | -14 to 870 psi |
| Accuracy ±1 digit | 0.5 % of final value |
| Resolution | 0.1 psi |
| Connection | 7/16" – UNF |
| Overload rel. | 870 psi |
| Battery life | 150 hrs |
| Dimensions | 4.9 × 1.3 × 1.2 in |
| Measurable media | CFC, HFC, HCFC, N, H2O, CO2 |
| Measuring units | bar, psi, MPa, kPa |
| General Specifications | |
| Bluetooth range | up to 350 ft |
| Storage temperature | -4 to 140 °F |
| Operating temperature | -4 to 122 °F |
| Compatibility |
Requires iOS 8.3 (or later) / Android 4.3 (or later) Requires mobile device with Bluetooth 4.0 |
| Battery type | 3 AAA batteries |
| Warranty | 2 years |
| Testo 605i | |
| Sensor type | Humidity – Capacitive, NTC |
| Measuring range | 0 to 100 %RH, -4 to 140 °F |
| Accuracy ±1 digit |
±3.0 %RH (10 to 35 %RH) ±2.0 %RH (35 to 65 %RH) ±3.0 %RH (65 to 90 %RH) ±5 %RH (< 10 %RH or > 90 %RH) (at 77 °F) ±1.4 °F (-4 to 32 °F) ±0.9 °F (32 to 140 °F) |
| Resolution | 0.1 %RH, 0.1 °F |
| Battery life | 150 hrs |
| Dimensions | 8.6 × 1.2 × 1.0 in, 2.9 in probe shaft |
| Measuring units | °F, °C, %rF / %RH, °Ftd, °Ctd, wetbulb °F / °C |
| General Specifications | |
| Bluetooth range | up to 350 ft |
| Storage temperature | -4 to 140 °F |
| Operating temperature | -4 to 122 °F |
| Compatibility |
Requires iOS 8.3 (or later) / Android 4.3 (or later) Requires mobile device with Bluetooth 4.0 |
| Battery type | 3 AAA batteries |
| Warranty | 2 years |
Includes
- (Choice of) No Meter, SC680 & 510i, or VOLT-100 & 510i
- (2-3) Testo 115i Pipe Clamp Thermometer Smart Probes
- (3) Testo 605i Humidity Smart Probes
- (2) Testo 549i Refrigeration Pressure Smart Probes
- (2) CPS 1/4" SAE Tee Valve Connectors
- (3) AAA Batteries Per Probe (24 Total)
- (1) Testo HVAC Softcase
Resources
measureQuick Quick Start Guide
Software / App
The Testo Smart Probes App combines the power of your smart phone/tablet with the accurate measurements of your Smart Probes. The operation and display of the instruments are communicated via Bluetooth to the App on your smart phone or tablet . The Smart Probes App uses the measurements to create custom reports (including added photos and comments). Information and reports can be saved as files and/or sent by e-mail. For Apple iOS and Android.
Download the Testo Smart Probes App for your Android or iOS devices
The measureQuick App supercharges a variety of BlueTooth smart tools with rich diagnostics, data logging and reporting capabilities. Now you can see intuitive visuals informing about each job, piece of equipment, or system all in one place!
Download the measureQuick App for your Android or iOS devices
App / Device Compatibility
- Requires iOS 8.3 or newer / Android 4.3 or newer
- Requires mobile device with Bluetooth 4.0