null

TEC Build Your Own BPI Weatherization Kit with Minneapolis Blower Door

SKU:
BPI-BYO-TEC
MPN:
BPI-BYO-TEC
  • Start with a Blower Door and choose options to build your own BPI Kit!
  • BPI BYO Kits include a Blower Door with Gauge as the base product
  • Choose a Duct Blaster with or without an extra Gauge
  • Choose the Si-CA 030 for residential combustion analysis
MSRP: $4,650.00
Price: $4,603.49
— You save $46.51
  • Sensit HXG-2DR Rechargeable Digital Gas Leak Detector main
  • TEC Minneapolis Duct Blaster® System with DG-1000
  • TEC Minneapolis Duct Blaster® System without Gauge

Description

TEC Build Your Own BPI Weatherization Kit by TruTech Tools

Choose options and build your own BPI kit with TEC Blower Door

The TEC Build Your Own BPI Kit from TruTech Tools is designed specifically for professionals in the BPI Weatherization community who need flexibility, reliability, and precision on the job. This customizable kit lets you hand-pick the tools you trust — including the Minneapolis Blower Door, Duct Blaster®, and important accessories such as a combustion analyzer and thermal imager — to match your specific testing and diagnostic needs.

Whether you're conducting blower door tests, duct leakage testing, or whole-house energy assessments, this kit gives you control to configure the right equipment while ensuring full BPI compliance and field-ready performance.

Perfect for:

  • BPI Building Analysts
  • Energy Auditors
  • Weatherization professionals
  • Contractors working on energy efficiency programs

Why choose this kit?

  • Built around TEC's proven and trusted equipment
  • Easily configure for your specific certification or project requirements
  • Backed by TruTech Tools' industry-leading support and expertise

Streamline your field setup with a kit built your way — without paying for gear you don't need. Create a BPI kit that works as hard as you do.

Specs

DG-1000 Specs
No. of Independent Pressure Channels Two
Pressure Range -2,500 to +2,500 Pascals (-10 to +10 inches of water)
Display Resolution 0.1 Pa for readings 0 - 999.9 Pa
1 Pa for readings 1000 Pa and larger
Accuracy at Typical Use Conditions*/** 0.9% of pressure reading or 0.12 Pa, whichever is greater
Units of Measure Channel A - Pascals (Future addition - inches of water)
Channel B - Pascals, CFM, CFM@75, CFM@50, CFM@25, ACH50, CFM@25/ft², CFM@25/100ft², CFM@50/ft², CFM@50/100ft², CFM@75/ft², CFM@75/100ft² (Future additions - inches of water and equivalent metric units)
Auto-zero On start up and then once every 10 seconds
Time Averaging 1, 5, 10 seconds and long-term (continuous update)
Operating Temperature Range*** 42 degrees F to 115 degrees F (5.5 degrees C to 46 degrees C)
Storage Temperature Range -4 degrees F to 140 degrees F (-20 degrees C to 60 degrees C)
Display 480 x 272 pixels, 3.75 x 2.125 inches, capacitive touch screen
Display Backlight User adjustable (default 40%)
Power Two 18650 Lithium Ion batteries with AC charger/power adapter included
Battery Life Over 15 hours of continuous use with default settings
13 hours of continuous use with default settings and wifi active
Auto-Off Adjustable from 10 minutes to 2 hours
Dimensions 7.0 x 4.2 x 1.4 inches
Weight 15.7 oz
5000 Series Fan Specs
Maximum Flow 6,300 CFM at free air (2,973 l/s, 10,700 m3/h)
5,350 CFM at 50 Pa (2,524 l/s, 9,090 m3/h)
4,900 CFM at 75 Pa (2,360 l/s, 8.495 m3/h)
Minimum Flow 300 CFM with Ring B (141 l/s, 510 m3/h)
85 CFM with Ring C (40 l/s, 144m3/h)
30 CFM with Ring D (14 l/s, 51 m3/h)
11 CFM with Ring E (5 l/s, 18 m3/h)
Dimensions 20 in. (50 cm) inlet diameter, 10.25 in (26 cm) length
Weight 33 lbs. (15 kg) with Flow Rings A & B
Flow Accuracy +/- 3% with DG-700 or DG-1000, Rings D & E +/- 4% or 1 CFM
Calibration Meets ASTM Standard E779, E1554, CGSB-149.10-M86, EN 13829, ATTMA Technical Standard 1, NFPA 2001, RESNET and USACE
Power 3/4 hp motor (110V)
Frame Specs
Frame Material Extruded aluminum
Width 28 in. to 40 in. (71 cm to 101 cm)
Height 52 in. to 96 in. (132 cm to 244 cm)
Seal EPDM flexible gasket
Panel Material Nylon with built-in vinyl window

Includes

By default this kit includes a TEC Blower Door as shown below. Add more products using the options near the 'Add to Cart' button to create your own custom kit.

  • Minneapolis Blower Door™ kit includes:
    • Model 3 fan
    • Ring A
    • Ring B
    • No flow plate
  • Aluminum frame carrying case contains:
    • Two 96" vertical pieces
    • Two 45" horizontal pieces
    • 45" crossbar with velcro strap
    • Gauge hanger bar
  • Blower door accessory case contains:
    • Single fan nylon panel
    • Fan speed controller
    • 30' clear tubing
    • Gauge board with clamp
    • Overview booklet
    • Wind Tee
  • Pressure and flow gauge case contains:
    • DG-1000 pressure and flow gauge
    • Two Lithium Ion batteries - installed
    • Charger block and cable
    • Screen protector
    • 15' green hose
    • 10' red hose
    • Fan control cable
    • Digital gauge extension tube
    • Plastic hose connectors
    • Calibration certificate